Hydrocut LR
Low-Rail WaterJet Shape Cutting Machine
Large gantry waterjet machine can be equipped with up to 4 waterjet heads, multiple plasma or other process tools. Cutting widths from 8 to 20 feet and almost unlimited length.
Features
- 3 Axis Gantry with Rack-and-Pinion Drives
- Heavy-Duty Box Beam Design
- Fully enclosed Y-axis beam and drives
- Welded, Machined Trucks with Oversized Wheel Bearings
- Machined Mating Surfaces for high stiffness and accuracy
- 30, 50, 60, 75, 100, 150 and 200 HP Intensifier Pumps Available
- Digital AC Drive Amplifiers for years of maintenance free operation
- AC Brushless Motors for wide speed range with accurate speed control
- Precision Heavy-Duty Gearboxes for accuracy and smooth motion
- Precise speed control down to 0.1 inches per minute (2.5 mm/min)
- Maximum Machine Speed: 600 ipm (15,240 mm/min)
- Cross Axis Powertrack Hose & Cable Carriers
- Positioning Accuracy: +/- .010”, Repeatability: +/- .002”
- Machined Heavy-Duty "T" Rail System For Accuracy and Durability
- Precision drive rack mounted directly to machined surface for precise rack alignment
View large imageClassifications
Specifications
| Cutting Width: | |
|---|---|
| Hydrocut 8 | 105.5 in., 2680 mm |
| Hydrocut 10 | 129.5 in., 3289 mm |
| Hydrocut 12 | 153.5 in., 3899 mm |
| Hydrocut 14 | 177.5 in., 4509 mm |
| Hydrocut 16 | 201.5 in., 5118 mm |
| Hydrocut 18 | 225.5 in., 5728 mm |
| Hydrocut 20 | 249.5 in., 6337 mm |
| Machine Width: | |
| Hydrocut 8 | 177 in., 4496 mm |
| Hydrocut 10 | 201 in., 5105 mm |
| Hydrocut 12 | 225 in., 5715 mm |
| Hydrocut 14 | 249 in., 6325 mm |
| Hydrocut 16 | 273 in., 6934 mm |
| Hydrocut 18 | 297 in., 7544 mm |
| Hydrocut 20 | 321 in., 8153 mm |
| Rail Gauge: | |
| Hydrocut 8 | 129.75 in., 32956 mm |
| Hydrocut 10 | 153.75 in., 3905 mm |
| Hydrocut 12 | 177.75 in., 4515 mm |
| Hydrocut 14 | 201.75 in., 5124 mm |
| Hydrocut 16 | 225.75 in., 5734 mm |
| Hydrocut 18 | 249.75 in., 6344 mm |
| Hydrocut 20 | 273.75 in., 6953 mm |
| Internal Clearance: | |
| Hydrocut 8 | 117.75 in., 2991 mm |
| Hydrocut 10 | 141.75 in., 3600 mm |
| Hydrocut 12 | 165.75 in., 4210 mm |
| Hydrocut 14 | 189.75 in., 4820 mm |
| Hydrocut 16 | 213.75 in., 5429 mm |
| Hydrocut 18 | 237.75 in., 6039 mm |
| Hydrocut 20 | 261.75 in., 6648 mm |
| Maximum Height to top of waterjet station | 84 in., 2134 mm |
| Parking Area | 89 in., 2261 mm |
| Maximum Waterjet Stations | 4 |
| Maximum Plasma Stations | 2 |
| Speed Range | 0.1 - 600 ipm, 2.5 - 15,240 mm/min. |
| Power Requirement | 230/460/575 vac, 50/60 Hz., 3 Phase, 20/25/45 Amps, 5 kVA, Special input voltages are available upon request |
Accessories
| There are no accessories. |
|---|
Extra Information
The gantry features all welded, stress relieved, reinforced components with all contact surfaces machined to ensure accurate matchup with mating surfaces. Machined wheels and roller bearings provide smooth, precise machine motion. The thick wall box beam provided ample strength and stiffness to support the process stations over a maximum of 20 ft. width. An independent reinforced deck supports all auxiliary equipment without placing any additional torsional forces on the main beam.
It can be equipped with ESAB’s Vision™ 52 Computer Numerical Control for the most advanced waterjet optimized motion control in the industry. Process control for any material is as easy as selecting the material type and thickness.
The main rail system is a floor mounted assembly with machined “T” rails mounted on fully adjustable cast steel pads, and protected by bellows covers (not shown). This allows almost unlimited cutting lengths. The “T” rails are machined on three sides and are tongue-and-groove on the ends to interlock at joints, thereby eliminating sideways movement. Adjustments are provided on the mounting pads to facilitate leveling and alignment. Drive racks are mounted directly to the machined surface of the rail, ensuring proper alignment.
The beam, ways, and drive rack are all protected by way covers, and all process stations use a fully enclosed high-speed vertical lifter. Smooth, accurate motion is provided by digital AC drive amplifiers, AC brushless motors and precision planetary gear boxes. The system is geared for the waterjet process, providing travel speeds from 0.1 to 750 ipm (2.54 - 19,050 mm/min).
Ordering Information
For more information, or to request a quotation, please contact your local ESAB Cutting Systems sales office:
In U.S.A.
411 S. Ebenezer Rd
P.O.Box 100545
Florence, SC 29501-0545
Phone (843) 664-4394
Fax (843) 664-4403
In Canada
6010 Tomken Road
Mississauga, Ontario L5T 1X9
Phone (905) 670-0220
Fax (905) 670-4879
In Mexico
AVE. Diego Diaz de Berlanga No. 130
Col. Nogalar
San Nicolas de los Garza, N.L. 66480
Monterrey, Mexico
Phone 52-8-305-3700
Fax 52-8-350-5920
Options
All listed prices are in U.S. dollars and represent the Manufacturer's Suggested Retail Price (MSRP) for sale in the United States. Actual selling price will be determined by the Distributor. Prices are subject to change without notice.