Sabre SXE
Máquina de pórtico medio de alta velocidad para corte de forma
Puente para trabajo pesado, de alta velocidad y de bajo perfil capaz de portar hasta 2 estaciones de plasma y 8 de oxicorte para anchos de corte de hasta 14 pies.
Features
- 3 Axis Gantry with Rack-and-Pinion Drives
- Reinforced-Fabricated Box Beam Design, precision machined to exacting specifications
- Precision Linear Rail Y-Axis Guide Way
- Low Profile Welded, Machined Trucks with Oversized Wheel Bearings for Increased Stability
- Machined Mating Surfaces for high stiffness and accuracy
- Digital AC Drive Amplifiers for years of maintenance free operation
- AC Brushless Motors for wide speed range with accurate speed control
- Precision Heavy-Duty Gearboxes for accuracy and smooth motion
- Maximum Machine Speed: 1400 ipm (35560 mm/min)
- Cross Axis Powertrack Hose & Cable Carriers
- Handles up to 6 inch thick (150 mm) material.
- Standard Positioning Accuracy: +/- .015”, Repeatability: +/- .005”
- "Plus" Positioning Accuracy: +/- .010", Repeatability: +/- .003"
- Machined top and side surfaces
- Heavy Duty H-Beam Mounted Rail System
- Adjustable Rail Pads for Adjusting Height, Level and Straightness
- Machined 85# Crane Rail Systems for Accuracy and Durability
- Precision drive rack mounted directly to machined surface for precise rack alignment
View large imageClassifications
Specifications
| Maximum Table Width | |
|---|---|
| Sabre DX - 2500 | 74 in., 1880 mm |
| Sabre DX - 3000 | 94 in., 2388 mm |
| Sabre DX - 3500 | 114 in., 2896 mm |
| Sabre DX - 4000 | 134 in., 3404 mm |
| Sabre DX - 4500 | 154 in., 3912 mm |
| Sabre DX - 5000 | 174 in., 4420 mm |
| Approximate Machine Width | |
| Sabre DX - 2500 | 159 in., 4072 mm |
| Sabre DX - 3000 | 180 in., 4572 mm |
| Sabre DX - 3500 | 200 in., 5072 mm |
| Sabre DX - 4000 | 220 in., 5572 mm |
| Sabre DX - 4500 | 240 in., 6072 mm |
| Sabre DX - 5000 | 260 in., 6572 mm |
| Rail Gauge | |
| Sabre DX - 2500 | 98 in., 2500 mm |
| Sabre DX - 3000 | 118 in., 3000 mm |
| Sabre DX - 3500 | 138 in., 3500 mm |
| Sabre DX - 4000 | 157 in., 4000 mm |
| Sabre DX - 4500 | 177 in., 4500 mm |
| Sabre DX - 5000 | 197 in., 5000 mm |
| Machine Height | 86 in., 2184 mm |
| Parking Area | 64 in., 1625 mm |
| Maximum Stations | 8 |
| Maximum Plasma | 2 |
| Speed Range | 2 - 1400 ipm, 50.8 - 35,560 mm/min. |
| Power Requirement | 230/460/575 vac, 50/60 Hz, 1 ph., 30 A, Special input voltages are available upon request |
Accessories
| There are no accessories. |
|---|
Extra Information
The beam is a welded, fabricated structure with numerous stiffeners that yields an extremely rigid gantry. The beam is machined to the tightest tolerance to achieve high accuracy over the life of the machine.
This low-profile dual side drive gantry sits on a 85# heavy-duty crane rail system mounted on H beams, providing a sturdy, stable foundation and easy installation. Rail systems are available in increments of 8 t. (2738 mm) up to 104 ft.
Cut quality and accuracy are dependent upon smooth, precise motion control in both axes. The Sabre DX does this by matching digital AC drive amplifiers with AC brushless motors and precision extra heavy-duty gear boxes with rack-and-pinion gearing. The gearbox features an oversized output bearing and output shaft to reduce torsional wind-up and increase torque capacity. Drive racks are mounted directly to the machined sides of the rail, ensuring consistent rack to rail alignment. All three drives are mounted on dual linear rail engagement slides, for perfect pinion alignment and very low backlash.
The Sabre DX achieves standard positioning accuracy of +/- 0.015" over a 60" area, with repeatability of +/- 0.005". A "plus" option features dual-linear rails on the Y-axis to improve accuracy to +/- 0.010", and repeatability to +/- 0.003.
Available processes on the Sabre DX include plasma, oxy-fuel, three torch edge prep, plasma marking, air-scribe, punch marking, routing and drilling.
Ordering Information
Para mas infromación o para ordenar una cotización, por favor contacte la oficina de ventas de Sistemas de Corte ESAB de su localidad: en U.S.A. 411 S. Ebenezer Rd C.P. 100545, Florence, SC 29501-0545 Teléfono (843) 664-4394 Fax (843) 664-4403; En Canada 6010 Tomken Road Mississauga, Ontario L5T 1X9 Teléfono (905) 670-0220 Fax (905) 670-4879; En Mexico AVE. Diego Diaz de Berlanga No. 130 Col. Nogalar San Nicolas de los Garza, N.L. 66480 Monterrey, Mexico Teleéfono 52-8-305-3700 Fax 52-8-350-5920
Options
All listed prices are in U.S. dollars and represent the Manufacturer's Suggested Retail Price (MSRP) for sale in the United States. Actual selling price will be determined by the Distributor. Prices are subject to change without notice.