PRODUCT SEARCH
Print this page

SUREWELD 10P

Sureweld 10P is an E6010 all-position cellulosic electrode developed for the pipe welding industry. It produces X-ray quality joints in all-positions and produces a steady, deep penetrating arc. It is ideal for general structural, ship, barge and storage tank fabrication and may be used for welding root passes in higher grade pipe in some circumstances.

Find nearest dealer
Product Data Sheet

Features

The red coated Sureweld 10P is an all-position cellulosic electrode developed for the pipe welding industry in order to improve ductility in the weld deposit while maintaining the standard welding characteristics needed for a pipe welding electrode. Sureweld 10P produces a steady, deep penetrating arc and maintains the proper keyhole in an open root. This electrode will produce X-ray quality joints in flat, horizontal, overhead, vertical-up, and vertical-down procedures. Sureweld 10P is recommended for welding API grades A25, A, B and X42 pipe and general structural, ship, barge and storage tank fabrication. It may also be used for welding root passes in higher grade pipe in some circumstances.

Sureweld 10P - Web Image Medium
  • Industry
  • Process
  • Pipeline
  • General Fabrication
  • Civil Construction
  • Welding Process
  • SMAW (Stick)

Classifications

  • Classifications/Approvals

    • ASME SFA 5.1
    • CERTIFIED BY C.W.B.- CSA W48
    • A.B.S.- AWS A5.1; E6010
    • AWS A5.1; E6010

Properties

Typical Properties
As Welded  
Yield Strength 67 ksi, 465 MPa
Tensile Strength 79 ksi, 550 MPa
Elongation in 2" 29 %
Typical Charpy V-Notch Impact Properties  
Testing Temperature 0ºF (-18ºC)  
As Welded 27 ft.-lbs., 37 J
Testing Temperature -20ºF (-29ºC)  
As Welded 22 ft.-lbs., 30 J
Typical Undiluted Weld Metal Analysis  
C 0.12 %
Mn 0.3 %
Si 0.2 %
P 0.009 %
S 0.017 %

Part No.

10P
Part No. Model / Product Description UPC
811004316 SW SCASE 7018 1/8 10P+ 3/32 662303069773
811005305 SW SCASE 10P+ 1/8 10P 1/8  
811005008 SW 10P 3/32X12X25#CT 662303050498
811005016 SW 10P 1/8X14X50#CT 662303050504
811005024 SW 10P 5/32X14X50#CT 662303050511
811005032 SW 10P 3/16X14X50#CT 662303050528
811005040 SW 10P 3/32X12X50#HS 662303050535
811005057 SW 10P 1/8X14X50#HS 662303050542
811005065 SW 10P 5/32X14X50#HS 662303050559
811005073 SW 10P 3/16X14X50#HS 662303050566
811003250 SW 10P 3/32X12X5#VALP 662303036416
811005081 SW 10P 3/32X12X11#QP 662303050573
811005099 SW 10P 1/8X14X11#QP 662303050580
811005107 SW 10P 5/32X14X11#QP 662303050597
811005115 SW 10P 3/16X14X11#QP 662303050603
811005123 SW 10P 3/32X12X5#VALP 662303050832
811005131 SW 10P 1/8X14X5#VALP 662303050849
811005149 SW 10P 5/32X14X5#VALP 662303050856
811005495 SW 10P 3/16X14X5#VALP 662303060015

SAW

Accessories

Depositions/Paramaters

Deposition Table
Diameter Optimal Amperage Range Amperage Deposition Rate Efficiency
3/32 in, 2.4 mm 75 A 40 - 75 1.5 lbs./hr., 0.7 kg./hr. 72 %
1/8 in, 3.2 mm 100 A 80 - 140 2.1 lbs./hr., 0.9 kg./hr. 76.3 %
130 A 80 - 140 2.3 lbs./hr., 1 kg./hr. 68.8 %
5/32 in, 4.0 mm 140 A 130 - 175 2.8 lbs./hr., 1.3 kg./hr. 73.6 %
170 A 130 - 175 2.9 lbs./hr., 1.3 kg./hr. 64.1 %
3/16 in, 4.8 mm 160 A 150 - 210 3.3 lbs./hr., 1.5 kg./hr. 74.9 %
190 A 150 - 210 3.5 lbs./hr., 1.6 kg./hr. 69.7 %
7/32 in, 5.6 mm 190 A 180 - 275 4.5 lbs./hr., 2 kg./hr. 76.9 %
230 A 180 - 275 5.1 lbs./hr., 2.3 kg./hr. 73.1 %

Extra Info

Procedure

Hold a short arc, but do not allow the coating to touch the molten pool. A slight oscillating motion is recommended in the horizontal and flat positions. Use a short whipping motion on vertical and overhead welds, allowing only enough time out of the crater for the metal to set up. Clean thoroughly between passes. Vertical down and flat position welds should be made at approximately the same amperages

Complementary Products

Seismic Data

All listed prices are in U.S. dollars and represent the Manufacturer's Suggested Retail Price (MSRP) for sale in the United States. Actual selling price will be determined by the Distributor. Prices are subject to change without notice.