PRODUCT SEARCH
Print this page

SUREWELD SW-75

Sureweld SW-75 is an all-position cellulosic coated electrode that produces weld deposits containing 0.5% Mo, allowing its use on high tensile, low alloy steels. Common applications include shaft build-up and repair, gear teeth, boilers, oil well casting, and forging dies.

Find nearest dealer
Product Data Sheet

Features

Sureweld SW-75 is an all-position cellulosic coated electrode which provides a highly penetrating arc. The deposit is capable of producing X-ray quality welds. The addition of molybdenum allows for its use on high tensile, low alloy steels. SW-75 electrodes are used on chrome-moly piping or casting where high tensile strength and creep resistance at high temperatures and high pressures are desired. In addition, some common applications have included shaft build-up and repair, gear teeth, boilers, oil well casting, forging dies, and alloy chain links.

SUREWELD SW-75
  • Industry
  • Pipeline
  • Process
  • General Fabrication
  • Welding Process
  • SMAW (Stick)

Classifications

  • Classifications/Approvals

    • AWS A5.5; E7010-A1
    • ASME SFA 5.5

Properties

Typical Properties
As Welded  
Yield Strength 71 ksi, 495 MPa
Tensile Strength 88 ksi, 605 MPa
Reduction in Area 68 %
Elongation in 2" 30 %
Stress Relieved 1 hr. @ 1150ºF (621ºC)  
Yield Strength 70 ksi, 485 MPa
Tensile Strength 86 ksi, 595 MPa
Reduction in Area 62 %
Elongation in 2" 26 %
Typical Charpy V-Notch Impact Properties  
Testing Temperature 40ºF (4ºC)  
As Welded 56 ft.-lbs., 76 J
Stress Relieved 1 hr. @ 1150ºF (621ºC) 58 ft.-lbs., 79 J
Testing Temperature 0ºF (-18ºC)  
As Welded 38 ft.-lbs., 52 J
Stress Relieved 1 hr. @ 1150ºF (621ºC) 40 ft.-lbs., 54 J
Testing Temperature -40ºF (-40ºC)  
As Welded 21 ft.-lbs., 28 J
Stress Relieved 1 hr. @ 1150ºF (621ºC) 28 ft.-lbs., 28 J
Testing Temperature -65ºF (-54ºC)  
As Welded 20 ft.-lbs., 27 J
Stress Relieved 1 hr. @ 1150ºF (621ºC) 13 ft.-lbs., 18 J
Typical Undiluted Weld Metal Analysis  
C 0.09 %
Mn 0.35 %
Si 0.2 %
P 0.011 %
S 0.015 %
Mo 0.52 %

Part No.

SW-75
Part No. Model / Product Description UPC
811010172 SW 75 3/32X12X50#HS 662303019280
811010180 SW 75 1/8X14X50#HS 662303019297
811040724 SW 75 5/32X14X50#HS 662303019549
811040690 SW 75 1/8X14X10#HS 662303019532

SAW

Accessories

Depositions/Paramaters

Deposition Table
Diameter Optimal Amperage Range Amperage Deposition Rate Efficiency
3/32 in, 2.4 mm 75 A 40 - 75 1.5 lbs./hr., 0.7 kg./hr. 72 %
1/8 in, 3.2 mm 100 A 80 - 140 2.1 lbs./hr., 0.9 kg./hr. 76.3 %
130 A 80 - 140 2.3 lbs./hr., 1 kg./hr. 68.8 %
5/32 in, 4.0 mm 140 A 130 - 175 2.8 lbs./hr., 1.3 kg./hr. 73.6 %
170 A 130 - 175 2.9 lbs./hr., 1.3 kg./hr. 64.1 %
3/16 in, 4.8 mm 160 A 150 - 210 3.3 lbs./hr., 1.5 kg./hr. 74.9 %
190 A 150 - 210 3.5 lbs./hr., 1.6 kg./hr. 69.7 %
7/32 in, 5.6 mm 190 A 180 - 275 4.5 lbs./hr., 2 kg./hr. 76.9 %
230 A 180 - 275 5.1 lbs./hr., 2.3 kg./hr. 73.1 %

Extra Info

Procedure

  • Horizontal and downhand welding require a medium to short arc with the electrode tilted 5° to 15° in the direction of travel. A slight oscillating motion is recommended for flat and horizontal position. Use a short whipping motion on vertical and overhead welds, allowing only enough time out of the crater for the metal to set up. Clean thoroughly between passes. When using in the vertical-down position, a stringer or weave technique should be incorporated. Amperages for vertical-down welding are similar to that of flat position welding

Complementary Products

Seismic Data

All listed prices are in U.S. dollars and represent the Manufacturer's Suggested Retail Price (MSRP) for sale in the United States. Actual selling price will be determined by the Distributor. Prices are subject to change without notice.