PRODUCT SEARCH
Print this page

ARCALOY 309L-16

Arcaloy 309L-16 is used primarily in the overlay of steel or to join stainless steel to carbon or low alloy steels. Usable on AC or DC current.

Find nearest dealer
Product Data Sheet

Features

Arcaloy 309L-16 is used for welding carbon and low alloy steels to stainless steels. This can be done provided the service temperature does not exceed about 700ºF (315ºC). Post weld heat treatment should only be performed after due consideration.

* This item is subject to Industry Alloy Surcharges

Arcaloy 309L-16
  • Industry
  • General Fabrication
  • Process
  • Welding Process
  • SMAW (Stick)

Classifications

  • Classifications/Approvals

    • ASME II SFA E309L-16/E309-16
    • ASME IX F No. 5
    • AWS A5.4; E309L-16/E309-16

Properties

Typical Properties
Yield Stress 65 ksi, 450 MPa
Tensile Strength 85 ksi, 590 MPa
Elongation in 2" 37 %
Typical Undiluted Weld Metal Analysis  
C 0.03 %
Mn 1.8 %
Si 0.45 %
Cr 23.5 %
Ni 13.5 %
Mo 0.3 %
Cu 0.1 %
Ferrite 9 FN

Part No.

309L-16
Part No. Model / Product Description UPC
251051108 AC 309L-16 1/16X9X6#HS 662303013318
251051405 AC 309L-16 1/4X14X10#HS 662303013325
251051801 AC 309L-16 1/8X14X10#HS 662303013332
251051801-03 AC 309L-16 1/8X14X10#HS 662303055387
251053104 AC 309L-16 3/16X14X10#HS 662303013349
251053203 AC 309L-16 3/32X12X10#HS 662303074616
251053302 AC 309L-16 3/32X9X6#HS 662303013356
251053302-03 AC 309L-16 3/32X9X6#HS 662303055349
251055307 AC 309L-16 5/32X14X10#HS 662303013363
251055604 AC 309L-16 5/64X9X6#HS 662303013370

SAW

Accessories

Depositions/Paramaters

Welding Parameters
Diameter Flat Vertical Overhead
1/16 in., 1.6 mm 20-35 Volts 15-25 Volts 20-30 Volts
5/64 in., 2.0 mm 30-50 Volts 25-35 Volts 30-40 Volts
3/32 in., 2.4 mm 40-70 (Plus 60-85) Volts 35-50 (40-60) Volts 40-60 Volts
1/8 in., 3.2 mm 65-100 (Plus 90-120) Volts 55-70 (70-80) Volts 60-85 Volts
5/32 in., 4.0 mm 100-145 (Plus 140-165) Volts 85-100 (80-90) Volts 95-120 Volts
3/16 in., 4.8 mm 130-190 (Plus 180-210) Volts 100-115 Volts 125-150 Volts
1/4 in., 6.4 mm 205-290 Volts

Extra Info

Arcaloy 309L electrodes are used for welding carbon and low alloy steels to stainless steels provided the service temperature does not exceed about 700ºF (370ºC). If the joint is thick, the low alloy side should be buttered with 309L electrodes, PWHT only if required, and the joint made with Arcaloy 316LF5 or Arcaloy 308L electrodes. Arcaloy 309L electrodes are used for the first layer of 308L cladding. They have been used to weld 304L when an increased chromium content will give increased corrosion resistance. The basic - rutile thin coating of Arcaloy 309L-16 gives an excellent combinatino of welding performance in all positions and a high resistance to cracking. It is therefore a good choice for a multitude of welding applications including tight joints.

Complementary Products

Seismic Data

All listed prices are in U.S. dollars and represent the Manufacturer's Suggested Retail Price (MSRP) for sale in the United States. Actual selling price will be determined by the Distributor. Prices are subject to change without notice.