ARCALOY 309/309H-16
Arcaloy 309/309H-16 is used for welding type 309 base metal when high temperature service is required. Usable on AC or DC current.
Features
Arcaloy 309/309H-16 is used for welding Type 309 base metal for all service temperatures designed for Type 309. Carbon content 0.04% minimum. It can be used for carbon and low alloy steels and stainless steel dissimilar joints.
* This item is subject to Industry Alloy Surcharges
View large imageClassifications
Classifications/Approvals
- ABS-AWS A5.4; E309-16
- QPL MIL-E-22200/2 MIL-309-16
- ASME II SFA E309-16
- ASME IX F No. 5
Properties
| Yield Stress | 55 ksi, 380 MPa |
|---|---|
| Tensile Strength | 90 ksi, 620 MPa |
| Elongation in 2" | 40 % |
| Typical Undiluted Weld Metal Analysis | |
| C | 0.06 % |
| Mn | 1.8 % |
| Si | 0.5 % |
| Cr | 24 % |
| Ni | 13.5 % |
| Mo | 0.1 % |
| Cu | 0.1 % |
| Ferrite | 7 FN |
Part No.
| Part No. | Model / Product Description | UPC |
|---|---|---|
| 251055893 | AC 309/309H-16 3/32X12X10#HS | 662303075637 |
| 251055901 | AC 309/309H-16 3/32X9X6#HS SPECIAL ORDER ONLY | 662303013394 |
| 251055919 | AC 309/309H-16 1/8X14X10#HS | 662303013400 |
| 251055943 | AC 309/309H-16 5/32X14X10#HS | 662303013431 |
| 251055950 | AC 309/309H-16 3/16X14X10#HS | 662303013448 |
SAW
Accessories
Depositions/Paramaters
| Diameter | Flat | Vertical | Overhead |
|---|---|---|---|
| 1/16 in., 1.6 mm | 20-35 Amps | 15-25 Amps | 20-30 Amps |
| 5/64 in., 2.0 mm | 30-50 Amps | 25-35 Amps | 30-40 Amps |
| 3/32 in., 2.4 mm | 40-70 (Plus 60-85) Amps | 35-50 (40-60) Amps | 40-60 Amps |
| 1/8 in., 3.2 mm | 65-100 (Plus 90-120) Amps | 55-70 (70-80) Amps | 60-85 Amps |
| 5/32 in., 4.0 mm | 100-145 (Plus 140-165) Amps | 85-100 (80-90) Amps | 95-120 Amps |
| 3/16 in., 4.8 mm | 130-190 (Plus 180-210) Amps | 100-115 Amps | 125-150 Amps |
| 1/4 in., 6.4 mm | 205-290 Amps |
Extra Info
Arcaloy 309/309H-16 electrodes are used for welding Type 309 and similar stainless steels for higher temperature service. In these applications, greater strength is required and a limited quantity of ferrite. They can also be used to weld low alloy to stainless steel dissimilar joints where a lower ferrite content is desired and is acceptable. In the latter case, the service temperature should not exceed 700ºF (370ºC). The basic-rutile thin coating of Arcaloy 309/309H-16 gives an excellent combination of welding performance in all positions and a high resistance to cracking. It is therefore a good choice for a multitude of welding applications including tight joints.
Complementary Products
Arcaloy 309/309H-15
Arcaloy 309/309H-15
Seismic Data
All listed prices are in U.S. dollars and represent the Manufacturer's Suggested Retail Price (MSRP) for sale in the United States. Actual selling price will be determined by the Distributor. Prices are subject to change without notice.