ARCALOY ER308L
Arcaloy ER308L is a low carbon grade of 308 designed for MIG or TIG of stainless steels such as AISI 301, 304, 304L steels.
Features
Arcaloy ER308L has good general corrosion resistance. This alloy has a low carbon content which makes this alloy particularly recommended where there is a risk of intergranular corrosion. Arcaloy ER308L is also for joining 18% Cr - 8% Ni type and Nb-stabilized steels of the same type, assuming the service temperature will not exceed 662°F (350°C).
* This item is subject to Industry Alloy Surcharges
View large imageClassifications
Classifications/Approvals
- ABS
- CWB
- ASME II SFA 5.9 ER308/308L
- ASME IX F No. 6
Properties
| GTAW using 100% Argon | |
|---|---|
| Yield Strength | 60 ksi, 410 MPa |
| Tensile Strength | 88 ksi, 605 MPa |
| Elongation in 2" | 43 % |
| Impact Toughness at -320ºF (-196ºC) | |
| Absorbed Energy | 80 ft.-lbs., 110 J |
| Lateral Expansion | 53 mils, 1.35 mm |
| Typical Chemical Analysis | |
| C | 0.015 % |
| Mn | 1.7 % |
| Si | 0.45 % |
| S | 0.01 % |
| Cr | 20 % |
| Ni | 10 % |
| Mo | 0.1 % |
| Cu | 0.15 % |
| Ferrite | 9 FN |
Part No.
| Part No. | Model / Product Description | UPC |
|---|---|---|
| 256071671 | AB ER308L 035X33#PSP | 662303076573 |
| 258014521 | AB ER308L 045X33#PSP | 662303077761 |
| 256011834 | AB ER308L 1/16X36X10#T/30CTINK | 662303044633 |
| 256011859 | AB ER308L 1/8X36X10#T/30CT INK | 662393008720 |
| 256011891 | AB ER308L 5/32X36X10T/30CT INK | 662303075262 |
| 257011122 | AB ER308L 1/16X60#CL | 662303008345 |
| 257011825 | AB ER308L 1/8X60#CL | 662303008352 |
| 257013326 | AB ER308L 3/32X60#CL | 662303008369 |
| 257013334 | AB ER308L 3/16X50#CL | 662393014103 |
| 257015321 | AB ER308L 5/32X60#CL | 662303008376 |
| 258011113 | AB ER308L 1/16X33#PSP | 662303027391 |
| 258013028 | AB ER308L 030X10#PSP/60CT | 662303027353 |
| 258013036 | AB ER308L 030X33#PSP | 662303030995 |
| 258013515 | AB ER308L 035X33#BAWS | 662303027377 |
| 258013523 | AB ER308L 035X10#PSP/60CT | 662303027360 |
| 258014513 | AB ER308L 045X33#BAWS | 662303027384 |
| 258023456 | AB ER308L 045X10#PSP/60CT | 662303043353 |
| 258076132 | AB ER308L 045X2#PSP | 662393012598 |
| 259601243 | AB ER308L 3/32X18X10#CT F1 | 662303521936 |
| 259601912 | AB ER308L 1/16X18X10#CT F1 | 662303667535 |
| 258023423 | AB ER308L 035X500#OMP | 662303047252 |
| 258023449 | AB ER308L 045X500#OMP | 662303047269 |
SAW
Accessories
Depositions/Paramaters
| Diameter | Wire Feed Speed | AMPS | Volts | Deposition Rate |
|---|---|---|---|---|
| .030 in., 0.8 mm | 156-312 ipm, 396-792 cm/min | 40-120 | 15-20 | 1.4-3.8 lbs./hr., 0.64-1.72 kg/hr |
| .035 in., 0.9 mm | 156-312 ipm, 396-792 cm/min | 60-140 | 15-21 | 1.6-5.4 lbs./hr., 0.73-2.45 kg/hr |
| .045 in., 1.2 mm | 140-280 ipm, 356-711 cm/min | 100-210 | 17-22 | 2.4-6.0 lbs./hr., 1.09-2.72 kg/hr |
| Diameter | Wire Feed Speed | DCEP (Electrode Positive) | Volts | Deposition Rate |
|---|---|---|---|---|
| .030 in., 0.8 mm | 265-550 ipm, 673-1397 cm/min | 160-210 | 24-28 | 6.5-9.6 lbs./hr., 2.95-4.35 kg./hr. |
| .035 in., 0.9 mm | 240-468 ipm, 610-1189 cm/min | 170-255 | 24-30 | 7.8-12.7 lbs./hr., 3.54-5.76 kg./hr. |
| .045 in., 1.2 mm | 192-360 ipm, 488-914 cm/min | 200-300 | 24-30 | 6.8-13.6 lbs./hr., 3.08-6.17 kg./hr. |
| .062 in., 1.6 mm | 120-192 ipm, 305-488 cm/min | 215-325 | 24-32 | 7.3-14.5 lbs./hr., 3.31-6.58 kg./hr. |
Extra Info
Complementary Products
Arcaloy MC308L
Arcaloy MC308L- OK Autrod 308LSi
Autrod ER308LSi - Arcaloy ER308LSi
ER308LSi - Tigrod ER308L
Tigrod ER308L - Tigrod ER308LSi
Tigrod ER308LSi
Seismic Data
All listed prices are in U.S. dollars and represent the Manufacturer's Suggested Retail Price (MSRP) for sale in the United States. Actual selling price will be determined by the Distributor. Prices are subject to change without notice.