PRODUCT SEARCH
COREWELD C6
Coreweld C-6 is a metal-cored wire designed to provide excellent arc characteristics, high travel speeds and minimal spatter.
Features
Coreweld C6 was developed and “fine-tuned” especially for hand-held, automatic and robotic welding in the automotive industry, as well as rail car manufacturing, structural welding and other similar applications. Never before has there been such a perfect pairing of filler metal and industry requirements for quality, productivity and profitability.
- Exceptionally high travel speeds, critical for automation
- Enhanced productivity that makes it more cost-effective than solid wires
- Improved feedability and arc stability as a result of special lubricants & surface treatment
- Outstanding deposition efficiencies that can exceed 99% at high travel speeds
- Ideal for flat or horizontal fillet welds, particularly in automated welding
- Performs well with Argon/CO2 shielding gas mixes from 75-92% Argon
- Handles rust and mill scale with good sidewall tie-in and wetting
- Broad operating parameters with both pulse and CVCC
- Excellent restart characteristics
- Very few silicon islands
- Lower spatter levels
View large imageClassifications
Classifications/Approvals
- AWS A5.20: SEISMIC
- AWS A5.18; E70C-6M
- A.B.S. - 3SA, 4YSA
- Certified by CWB to CSA W48
- ASME SFA 5.18
Properties
| As Welded 75% Ar / 25% CO2 | |
|---|---|
| Yield Strength | 74 ksi, 505 MPa |
| Tensile Strength | 86 ksi, 595 MPa |
| Reduction in Area | 64.4 % |
| Elongation in 2" | 27 % |
| As Welded 92% Ar / 8% CO2 | |
| Yield Strength | 79 ksi, 545 MPa |
| Tensile Strength | 86 ksi, 595 MPa |
| Reduction in Area | 63 % |
| Elongation in 2" | 25 % |
| Typical Charpy V-Notch Impact Properties | |
| Testing Temperature 0ºF (-18ºC) | |
| As Welded 75% Ar / 25% CO2 | 55 ft.-lbs., 75 J |
| Testing Temperature -20ºF (-29ºC) | |
| As Welded 75% Ar / 25% CO2 | 38 ft.-lbs., 52 J |
| As Welded 92% Ar / 8% CO2 | 56 ft.-lbs., 76 J |
| Typical Undiluted Weld Metal Analysis | |
| 75% Ar / 25% CO2 | |
| C | 0.04 % |
| Mn | 1.6 % |
| Si | 0.7 % |
| P | 0.012 % |
| S | 0.016 % |
| 92% Ar / 8% CO2 | |
| C | 0.04 % |
| Mn | 1.6 % |
| Si | 0.8 % |
| P | 0.015 % |
| S | 0.017 % |
Part No.
| Part No. | Model / Product Description | UPC |
|---|---|---|
| 243411022 | CW C6 1/16X60#CL | 662303054441 |
| 243411113 | CW C6 045X500#MP | 662303056339 |
| 243411121 | CW C6 1/16X500#MP | 662303054861 |
| 243411139 | CW C6 052X500#MP | 662303064297 |
| 243411147 | CW C6 045X60#CL | 662303067663 |
| 243411154 | CW C6 052X60#CL | 662303068141 |
| 243411162 | CW C6 052X33#AWS | 662303068134 |
| 243411170 | CW C6 045X600#OMP | 662303070526 |
| 243411188 | CW C6 052X600#OMP | 662303070267 |
| 243411196 | CW C6 1/16X600#OMP | 662303070274 |
| 243411204 | CW C6 045X33#AWS | 662303056346 |
| 243411220 | CW C6 1/16X33#AWS | 662303059057 |
SAW
Accessories
Depositions/Paramaters
| Diameter | Amps | Volts | Wire Feed Speed | Deposition Rate | Efficiency |
|---|---|---|---|---|---|
| 0.045 in, 1.2 mm | 175 A | 26 V | 233 ipm, 592 cm/min | 6.0 lbs./hr., 2.7 kg./hr. | 98.4 % |
| 200 A | 27 V | 275 ipm, 699 cm/min | 7.1 lbs./hr., 3.2 kg./hr. | 97.9 % | |
| 265 A | 28 V | 420 ipm, 1067 cm/min | 12.6 lbs./hr., 5.7 kg./hr. | 97.2 % | |
| 330 A | 29 V | 623 ipm, 1582 cm/min | 16.4 lbs./hr., 7.4 kg./hr. | 98.5 % | |
| 350 A | 30 V | 680 ipm, 1727 cm/min | 18.6 lbs./hr., 8.4 kg./hr. | 99.3 % | |
| 0.052 in, 1.4 mm | 225 A | 23 V | 200 ipm, 508 cm/min | 6.1 lbs./hr., 2.8 kg./hr. | 87.9 % |
| 300 A | 25 V | 300 ipm, 762 cm/min | 10.1 lbs./hr., 4.6 kg./hr. | 92.1 % | |
| 370 A | 27 V | 400 ipm, 1016 cm/min | 13.8 lbs./hr., 6.3 kg./hr. | 97.5 % | |
| 420 A | 29 V | 500 ipm, 1270 cm/min | 17.3 lbs./hr., 7.8 kg./hr. | 99.6 % | |
| 500 A | 31 V | 600 ipm, 1524 cm/min | 20.9 lbs./hr., 9.5 kg./hr. | 95.3 % | |
| 1/16 in, 1.6 mm | 270 A | 24 V | 200 ipm, 508 cm/min | 8.7 lbs./hr., 3.9 kg./hr. | 92.7 % |
| 350 A | 27 V | 300 ipm, 762 cm/min | 13.9 lbs./hr., 6.3 kg./hr. | 97.7 % | |
| 440 A | 30 V | 400 ipm, 1016 cm/min | 19.2 lbs./hr., 8.7 kg./hr. | 98.6 % | |
| 480 A | 31 V | 500 ipm, 1270 cm/min | 23.0 lbs./hr., 10.4 kg./hr. | 99.6 % | |
| 500 A | 33 V | 600 ipm, 1524 cm/min | 28.0 lbs./hr., 12.7 kg./hr. | 99.6 % |
Extra Info
Shielding Gas
85% Argon / 15% CO2 to 92% Argon / 8% CO2
Complementary Products
Seismic Data
All listed prices are in U.S. dollars and represent the Manufacturer's Suggested Retail Price (MSRP) for sale in the United States. Actual selling price will be determined by the Distributor. Prices are subject to change without notice.