DUAL SHIELD 70 ULTRA PLUS
Dual Shield 70 Ultra Plus is an all-position wire that is uniquely designed to provide high deposition, outstanding all position performance and a fume emission rate approaching that of solid wires.
Features
Dual Shield 70 Ultra Plus is an all-position wire that is uniquely designed to provide high deposition, outstanding all position performance and a fume emission rate approaching that of solid wires. It is optimized for use with 90% Ar/10% CO2 shielding but works well with mixes ranging from 75% Ar/25% CO2 to 95% Ar/5% CO2. Among the outstanding features of Dual Shield 70 Ultra Plus are a very wide operating window, very high out of position deposition rates (vertical up and overhead at over 12 lb/hr), and welds that are virtually spatter free. Dual Shield 70 Ultra Plus may be used in a variety of applications including railcar, automotive, heavy equipment, and general structural steel fabrication. It is especially recommended in applications where reduction of welding fume is a priority.
View large imageClassifications
Classifications/Approvals
- CERTIFIED BY C.W.B.- CSA W48
- A.B.S.- 3SA,3YSA(H10)
- L.R.- 3S,3YS(H10)
- AWS A5.20; E71T-1M/T-9M
- G.L.- 3YH10S
- B.V.- SA3YM(HH)
- D.N.V.- III YMS(H10)
- ASME SFA 5.20
Properties
| As Welded 75% Ar / 25% CO<sub>2</sub> | |
|---|---|
| Yield Strength | 76 ksi, 525 MPa |
| Tensile Strength | 86 ksi, 595 MPa |
| Elongation in 2" | 29 % |
| As Welded 90% Ar / 10% CO2 | |
| Yield Strength | 80 ksi, 550 MPa |
| Tensile Strength | 88 ksi, 605 MPa |
| Elongation in 2" | 27 % |
| Typical Charpy V-Notch Impact Properties | |
| Testing Temperature 0ºF (-18ºC) | |
| As Welded 75% Ar / 25% CO2 | 53 ft.-lbs., 72 J |
| As Welded 90% Ar / 10% CO2 | 68 ft.-lbs., 92 J |
| Testing Temperature -20ºF (-29ºC) | |
| As Welded 75% Ar / 25% CO2 | 40 ft.-lbs., 54 J |
| As Welded 90% Ar / 10% CO2 | 43 ft.-lbs., 58 J |
| Typical Undiluted Weld Metal Analysis | |
| 75% Ar / 25% CO2 | |
| C | 0.04 % |
| Mn | 1.2 % |
| Si | 0.6 % |
| P | 0.016 % |
| S | 0.012 % |
| 90% Ar / 10% CO2 | |
| C | 0.04 % |
| Mn | 1.24 % |
| Si | 0.7 % |
| P | 0.015 % |
| S | 0.012 % |
Part No.
| Part No. | Model / Product Description | UPC |
|---|---|---|
| 245015813 | DS 70 ULT PLUS 045X33#AWS | 662303020019 |
| 245015896 | DS 70 ULT PLUS 052X33#AWS | 662303030131 |
| 245015904 | DS 70 ULT PLUS 1/16X33#AWS | 662303030148 |
| 245015912 | DS 70 ULT PLUS 045X60#CL | 662303034801 |
| 245015920 | DS 70 ULT PLUS 052X60#CL | 662303034818 |
| 245015938 | DS 70 ULT PLUS 1/16X60#CL | 662303034825 |
| 245018007 | DS 70 ULT PLUS 045X10#PSP | 662303037215 |
| 245018080 | DS 70 ULT PLUS 1/16X550#OMP | 662303075149 |
| 245018098 | DS 70 ULT PLUS 1/16X33#AWS VP | 662303076658 |
SAW
Accessories
Depositions/Paramaters
| Diameter | Wire Feed Speed | Amps | Volts | Shielding Gas | TTW Dist. | Deposition Rate | Efficiency |
|---|---|---|---|---|---|---|---|
| 0.045 in., 1.2 mm | 200 ipm, 508 cm/min | 150 A | 25.5 V | C-8 | 0.625 in. | 3.9 lb/hr, 1.8 kg/hr | 84.1 % |
| 300 ipm, 762 cm/min | 200 A | 26.5 V | C-8 | 0.625 in. | 6.0 lb/hr, 2.7 kg/hr | 86.1 % | |
| 400 ipm, 1016 cm/min | 245 A | 27.5 V | C-8 | 0.625 in. | 8.1 lb/hr, 3.7 kg/hr | 85.8 % | |
| 500 ipm, 1270 cm/min | 293 A | 29 V | C-8 | 0.625 in. | 10.1 lb/hr, 4.6 kg/hr | 86.6 % | |
| 600 ipm, 1524 cm/min | 335 A | 30.5 V | C-8 | 0.625 in. | 12.2 lb/hr, 5.5 kg/hr | 86.5 % | |
| 0.052 in., 1.3 mm | 150 ipm, 381 cm/min | 157 A | 24 V | C-8 | 0.75 in. | 4.0 lb/hr, 1.8 kg/hr | 85.8 % |
| 200 ipm, 508 cm/min | 205 A | 24.5 V | C-8 | 0.75 in. | 5.5 lb/hr, 2.5 kg/hr | 86.1 % | |
| 300 ipm, 762 cm/min | 265 A | 26 V | C-8 | 0.75 in. | 8.2 lb/hr, 3.7 kg/hr | 86.1 % | |
| 400 ipm, 1016 cm/min | 335 A | 27.5 V | C-8 | 0.75 in. | 11.1 lb/hr, 5.0 kg/hr | 87.3 % | |
| 500 ipm, 1270 cm/min | 365 A | 29 V | C-8 | 0.75 in. | 13.8 lb/hr, 6.3 kg/hr | 87.0 % | |
| 600 ipm, 1524 cm/min | 465 A | 31.5 V | C-8 | 0.75 in. | 16.6 lb/hr, 7.5 kg/hr | 87.0 % | |
| 0.062 in., 1.6 mm | 150 ipm, 381 cm/min | 210 A | 24.5 V | C-8 | 0.75 in. | 5.5 lb/hr, 2.5 kg/hr | 86.3 % |
| 250 ipm, 635 cm/min | 315 A | 25.5 V | C-8 | 0.75 in. | 9.2 lb/hr, 4.2 kg/hr | 86.3 % | |
| 300 ipm, 762 cm/min | 360 A | 26.5 V | C-8 | 0.75 in. | 10.9 lb/hr, 4.9 kg/hr | 85.6 % | |
| 350 ipm, 889 cm/min | 410 A | 27.5 V | C-8 | 0.75 in. | 12.7 lb/hr, 5.7 kg/hr | 86.4 % | |
| 400 ipm, 1016 cm/min | 432 A | 28.5 V | C-8 | 0.75 in. | 14.7 lb/hr, 6.7 kg/hr | 87.4 % | |
| 500 ipm, 1270 cm/min | 545 A | 30 V | C-8 | 0.75 in. | 18.3 lb/hr, 8.3 kg/hr | 87.1 % |
Extra Info
With exceptionally low fume generation and excellent all position arc characteristics, the new Dual Shield 70 Ultra Plus features a high deposition rate, superior weldability, and very low spatter.
Shielding Gas
Ar/CO2 mixtures between 75-95% Ar
Complementary Products
Seismic Data
All listed prices are in U.S. dollars and represent the Manufacturer's Suggested Retail Price (MSRP) for sale in the United States. Actual selling price will be determined by the Distributor. Prices are subject to change without notice.