DUAL SHIELD II 70T-12H4
Dual Shield II 70T-12H4 is an all-position, low hydrogen flux cored wire that provides excellent low temperature toughness. This flux cored wire provides a smooth arc and low spatter levels, excellent for construction, fabrication, offshore and railcar applications.
Features
Each of the new Dual Shield II H4 wires is an all-position flux cored wire that provides excellent low temperature toughness in both the as welded and/or stress relieved conditions (as applicable) when used with 75% Ar/25% CO2. Each can produce diffusible hydrogen levels of < 4mL/100g over a wide range of welding parameters. Dual Shield II 70T-12H4 also provides the smooth arc and low spatter levels characteristic of other Dual Shield II wires. Dual Shield II 70T-12H4 can be used in construction, heavy equipment fabrication, offshore oil components, shipbuilding, and railcar. Weld metal analysis is similar to E7018 & E7018-1 low hydrogen covered electrodes
View large imageClassifications
Classifications/Approvals
- AWS A5.20; E71T-1MJH4/T-12MJH4
- CERTIFIED BY C.W.B.- CSA W48
- ASME SFA 5.20
- D.N.V.- IV YMS(H5)
- L.R.- 4Y40S(H10)
- A.B.S.- 3SA,3YSA(H5)
- G.L.- 4YH10S
Properties
| As Welded 75% Ar / 25% CO<sub>2</sub> | |
|---|---|
| Yield Strength | 72 ksi, 495 MPa |
| Tensile Strength | 80 ksi, 550 MPa |
| Reduction in Area | 71 % |
| Elongation in 2" | 27 % |
| Stress Relieved 2 hrs. @ 1150ºF (621ºC) 75% Ar / 25% CO2 | |
| Yield Strength | 68 ksi, 460 MPa |
| Tensile Strength | 78 ksi, 540 MPa |
| Reduction in Area | 73 % |
| Elongation in 2" | 30 % |
| Typical Charpy V-Notch Impact Properties | |
| Testing Temperature -20ºF (-29ºC) | |
| As Welded 75% Ar / 25% CO2 | 79 ft.-lbs., 107 J |
| Stress Relieved 2 hrs. @ 1150ºF (621ºC) 75% Ar / 25% CO2 | 76 ft.-lbs., 103 J |
| Testing Temperature -40ºF (-40ºC) | |
| As Welded 75% Ar / 25% CO2 | 62 ft.-lbs., 84 J |
| Typical Undiluted Weld Metal Analysis | |
| 75% Ar / 25% CO2 | |
| C | 0.027 % |
| Mn | 1.08 % |
| Si | 0.33 % |
| P | 0.016 % |
| S | 0.008 % |
Part No.
| Part No. | Model / Product Description | UPC |
|---|---|---|
| 245016282 | DS II 70T-12H4 035X33#PSP VP | 662303058487 |
| 245016290 | DS II 70T-12H4 045X33#PSP VP | 662303058494 |
| 245016290-21 | DS II 70T-12H4 045X33#PSP VP | 662303059569 |
| 245016308 | DS II 70T-12H4 052X33#PSP VP | 662303058500 |
| 245016316 | DS II 70T-12H4 1/16X33#PSP VP | 662303058517 |
| 245016324 | DS II 70T-12H4 045X10#PSP VP | 662303058524 |
| 245016365 | DS II 70T-12H4 1/16X60#CL | 662303058555 |
| 245016365-21 | DS II 70T-12H4 1/16X60#CL | 662303062934 |
| 245016373 | DS II 70T-12H4 052X25#AWS VP | 662303058562 |
| 245016381 | DS II 70T-12H4 052X25#PSP VP | 662303058579 |
| 245016399 | DS II 70T-12H4 1/16X33#AWS VP | 662303058586 |
| 245016431 | DS II 70T-12H4 045X60#CL | 662303077587 |
| 245016449 | DS II 70T-12H4 1/16X600#OMP | 662303077853 |
SAW
Accessories
Depositions/Paramaters
| Diameter | Wire Feed Speed | Amps | Volts | Shielding Gas | TTW Dist. | Deposition Rate | Efficiency |
|---|---|---|---|---|---|---|---|
| 0.045 in., 1.2 mm | 200 ipm, 508 cm/min | 145 A | 24.5 V | C-25 | 0.625 in. | 3.8 lb/hr, 1.7 kg/hr | 81.5 % |
| 300 ipm, 762 cm/min | 195 A | 26 V | C-25 | 0.625 in. | 5.8 lb/hr, 2.6 kg/hr | 81.8 % | |
| 400 ipm, 1016 cm/min | 245 A | 27.5 V | C-25 | 0.625 in. | 7.9 lb/hr, 3.6 kg/hr | 82.9 % | |
| 500 ipm, 1270 cm/min | 285 A | 29 V | C-25 | 0.625 in. | 9.9 lb/hr, 4.5 kg/hr | 84.6 % | |
| 600 ipm, 1524 cm/min | 330 A | 30.5 V | C-25 | 0.625 in. | 12.3 lb/hr, 5.6 kg/hr | 86.8 % | |
| 0.052 in., 1.3 mm | 150 ipm, 381 cm/min | 155 A | 24 V | C-25 | 0.75 in. | 3.5 lb/hr, 1.6 kg/hr | 72.3 % |
| 200 ipm, 508 cm/min | 185 A | 25 V | C-25 | 0.75 in. | 5.4 lb/hr, 2.4 kg/hr | 82.1 % | |
| 300 ipm, 762 cm/min | 250 A | 26.5 V | C-25 | 0.75 in. | 8.1 lb/hr, 3.7 kg/hr | 83.6 % | |
| 400 ipm, 1016 cm/min | 305 A | 28 V | C-25 | 0.75 in. | 11.1 lb/hr, 5.1 kg/hr | 85.2 % | |
| 500 ipm, 1270 cm/min | 360 A | 29.5 V | C-25 | 0.75 in. | 14.2 lb/hr, 6.4 kg/hr | 87.5 % | |
| 600 ipm, 1524 cm/min | 415 A | 30.5 V | C-25 | 0.75 in. | 17.3 lb/hr, 7.8 kg/hr | 87.7 % | |
| 0.062 in., 1.6 mm | 150 ipm, 381 cm/min | 190 A | 24 V | C-25 | 0.75 in. | 5.3 lb/hr, 2.4 kg/hr | 80.3 % |
| 250 ipm, 635 cm/min | 295 A | 25 V | C-25 | 0.75 in. | 8.6 lb/hr, 3.9 kg/hr | 80.8 % | |
| 300 ipm, 762 cm/min | 335 A | 26 V | C-25 | 0.75 in. | 10.8 lb/hr, 4.9 kg/hr | 85.4 % | |
| 350 ipm, 889 cm/min | 365 A | 27 V | C-25 | 0.75 in. | 12.9 lb/hr, 5.9 kg/hr | 86.9 % | |
| 400 ipm, 1016 cm/min | 410 A | 28 V | C-25 | 0.75 in. | 15.0 lb/hr, 6.8 kg/hr | 87.9 % | |
| 500 ipm, 1270 cm/min | 500 A | 30.5 V | C-25 | 0.75 in. | 18.7 lb/hr, 8.5 kg/hr | 88.3 % |
Extra Info
Shielding Gas
75% Argon/25% CO2
Complementary Products
Seismic Data
All listed prices are in U.S. dollars and represent the Manufacturer's Suggested Retail Price (MSRP) for sale in the United States. Actual selling price will be determined by the Distributor. Prices are subject to change without notice.