Print this page

ALL-STATE SILFLO 15

A self-fluxing brazing alloy for copper to copper joining. Use for higher ductility in joints where close fit-up is impossible (.002" to .006") and electrical conductivity is important. Do not use with ferrous metals. For best result use with All-State S-200 or No.110 when joining copper to brass or bronze.

Features

A self-fluxing brazing alloy for copper to copper joining. Use for higher ductility in joints where close fit-up is impossible. Joint clearance .002" to .006". Use All-State S-200 flux when joining brass or bronze metals. Additional sizes available upon request. Tip of rod colored red.

Classifications

Properties

Typical Properties
Nominal Chemical Composition  
Phosphorous 5 %
Silver 15 %
Liquidus 1475 °F, 802 °C
Brazing temperature range 1300 to 1500 °F, 704 to 816 °C
Solidus 1190 °F, 643 °C
Copper Balance

Part No.

SILFLO 15
Part No. Model / Product Description UPC
69060053 A/S SFLO-15 050X1/8X18X25 662393003541
69060054 A/S SFLO-15 1/8SQX36X10X60 662393003558
69060070 A/S SFLO-15 1/16X18X10# 662393011409
69060071 A/S SLFO-15 050X1/8X18X10X40 662393003589
69060072 A/S SFLO-15 050X1/8X18X1#TBE 662393003596
69060074 A/S SFLO-15 1/8RDX18X10# 662393013946

SAW

Accessories

Depositions/Paramaters

Extra Info

Procedure

Clean joint area. Jigs and fixtures will help hold parts in place. Paint brass and bronze parts with All-State No. 110 or S-200 Flux. Use a large tip, heat broadly until flux liquifies or copper turns dull red. Apply sufficient alloy to fill joint. Do not overheat or remelt. Submerge in hot water and brush to remove flux. Ten percent sulfuric acid and water solution will restore copper color. Rinse with clear hot water.

Complementary Products

Seismic Data

All listed prices are in U.S. dollars and represent the Manufacturer's Suggested Retail Price (MSRP) for sale in the United States. Actual selling price will be determined by the Distributor. Prices are subject to change without notice.