SHIELD-BRIGHT 309H
Shield-Bright 309H was developed for out-of-position weld on 309H stainless where high temperature service is required.
Features
Shield-Bright 309H was developed for the welding of Type 309 and similar stainless steels. Its ferrite content, which is lower than Shield-Bright 309L, allows for joining carbon and low alloy steels provided the dilution is not too great and the service temperature is above 750ºF (399ºC) where creep strength properties are necessary.
Shield-Bright 309H was designed for welding in all positions and performs particularly well in the vertical position with excellent slag removal.
* This item is subject to Industry Alloy Surcharges
View large imageClassifications
Classifications/Approvals
- AWS A5.22; E309T1-1/T1-4
- ASME II SFA 5.22 E309T1-1/T1-4
- ASME IX F No. 6
Properties
| As Welded 75% Ar / 25% CO2 | |
|---|---|
| Tensile Strength | 90 ksi, 620 MPa |
| Yield Strength | 70 ksi, 480 MPa |
| Elongation in 2" | 35 % |
| Typical Undiluted Weld Metal Analysis | |
| As Welded CO2 | |
| C | 0.06 % |
| Mn | 1.2 % |
| Si | 0.8 % |
| Cr | 24 % |
| Ni | 13 % |
| Mo | 0.1 % |
| Cu | 0.1 % |
| Ferrite | 13 FN |
| As Welded 75% Ar / 25% CO2 | |
| C | 0.06 % |
| Mn | 1.3 % |
| Si | 0.9 % |
| Cr | 24.5 % |
| Ni | 13 % |
| Mo | 0.1 % |
| Cu | 0.1 % |
| Ferrite | 14 FN |
Part No.
SAW
Accessories
Depositions/Paramaters
| Diameter | Amps | Volts | Wire Feed Speed | Deposition Rate | Efficiency | Electrical Stickout |
|---|---|---|---|---|---|---|
| .035 in, 0.9 mm | 100 A | 23 | 265 ipm, 6.7 cm/min | 2.9 lbs./hr., 1.3 kg./hr. | 83.9 % | 1/2 - 1 inches, 12.5 - 25 mm |
| 120 A | 23 | 315 ipm, 8 cm/min | 3.4 lbs./hr., 1.5 kg./hr. | 81.4 % | 1/2 - 1 inches, 12.5 - 25 mm | |
| 140 A | 25 | 405 ipm, 10.3 cm/min | 4.6 lbs./hr., 2.1 kg./hr. | 82.6 % | 1/2 - 1 inches, 12.5 - 25 mm | |
| 170 A | 26 | 530 ipm, 13.5 cm/min | 5.7 lbs./hr., 2.6 kg./hr. | 81.8 % | 1/2 - 1 inches, 12.5 - 25 mm | |
| .045 in, 1.2 mm | 130 A | 25 | 227 ipm, 5.8 cm/min | 4.25 lbs./hr., 1.9 kg./hr. | 84 % | 1/2 - 1 inches, 12.5 - 25 mm |
| 165 A | 26 | 341 ipm, 8.7 cm/min | 6.14 lbs./hr., 2.8 kg./hr. | 83 % | 1/2 - 1 inches, 12.5 - 25 mm | |
| 190 A | 28 | 445 ipm, 11.3 cm/min | 8.08 lbs./hr., 3.7 kg./hr. | 84 % | 1/2 - 1 inches, 12.5 - 25 mm | |
| 220 A | 30 | 567 ipm, 14.4 cm/min | 10.24 lbs./hr., 4.6 kg./hr. | 84 % | 1/2 - 1 inches, 12.5 - 25 mm | |
| 1/16 in, 1.6 mm | 170 A | 25 | 154 ipm, 3.9 cm/min | 5.34 lbs./hr., 2.4 kg./hr. | 83 % | 1/2 - 1 inches, 12.5 - 25 mm |
| 210 A | 27 | 193 ipm, 4.9 cm/min | 6.89 lbs./hr., 3.1 kg./hr. | 82.5 % | 1/2 - 1 inches, 12.5 - 25 mm | |
| 250 A | 28 | 243 ipm, 6.2 cm/min | 8.57 lbs./hr., 3.9 kg./hr. | 83 % | 1/2 - 1 inches, 12.5 - 25 mm | |
| 300 A | 29 | 321 ipm, 8.2 cm/min | 11.43 lbs./hr., 5.2 kg./hr. | 83 % | 1/2 - 1 inches, 12.5 - 25 mm |
Extra Info
Shielding Gas
75%Ar / 25%CO2 or 100%CO2
Complementary Products
Seismic Data
All listed prices are in U.S. dollars and represent the Manufacturer's Suggested Retail Price (MSRP) for sale in the United States. Actual selling price will be determined by the Distributor. Prices are subject to change without notice.