ATOM ARC 7018
El Atom Arc 7018 es un electrodo para soldadura fuera de posición bajo en Hidrògeno, resistente a la humedad.
características
El Atom Arc 7018 es un electrodo para soldadura fuera de posición bajo en Hidrògeno, resistente a la humedad. Su gran rango de operaciòn y la suave transferencia de fusiòn de metal, minimiza la limpieza de post soldadura. Este electrodo de calidad premium alcanza muchos codigos y especificaciones de soldadura. El Atom Arc 7018 fue desarrollado para fundir carbòn y aceros de baja aleaciòn, incluyendo una variedad de aceros endurecibles.
View large imageclasificaciones
Classifications/Approvals
- Mil-E-22200/1 Mil-7018
- AWS A5.1; E7018H4R
- A.B.S.- 2Y / AWS A5.1; E7018
- D.N.V.- 3Y(H10)
- L.R.- 3m,3Ym(H10)
- ASME SFA 5.1
- CERTIFIED BY C.W.B.- CSA W48
propiedades
| As Welded | |
|---|---|
| Yield Strength | 68 ksi, 470 MPa |
| Tensile Strength | 78 ksi, 540 MPa |
| Elongation in 2" | 30 % |
| Reduction in Area | 75 % |
| Stress Relieved 1 hr. @ 1150ºF (621ºC) | |
| Yield Strength | 57 ksi, 395 MPa |
| Tensile Strength | 71 ksi, 490 MPa |
| Reduction in Area | 77 % |
| Elongation in 2" | 33 % |
| Stress Relieved 8 hrs. @ 1150ºF (621ºC) | |
| Yield Strength | 57 ksi, 395 MPa |
| Tensile Strength | 70 ksi, 485 MPa |
| Reduction in Area | 77 % |
| Elongation in 2" | 33 % |
| Typical Charpy V-Notch Impact Properties | |
| Testing Temperature -20ºF (-29ºC) | |
| As Welded | 168 ft.-lbs., 225 J |
| Stress Relieved 8 hrs. @ 1150ºF (621ºC) | 193 ft.-lbs., 260 J |
| Typical Undiluted Weld Metal Analysis | |
| C | 0.045 % |
| Mn | 1.1 % |
| Si | 0.4 % |
| P | 0.015 % |
| S | 0.014 % |
Part No.
| Part No. | Model / Product Description | UPC |
|---|---|---|
| 255011413 | AA 7018 1/4X18X50#HS | 662303016043 |
| 255011819 | AA 7018 1/8X14X50#HS | 662303016081 |
| 255011868 | AA 7018 1/8X14X50#CT | 662303016128 |
| 255013112 | AA 7018 3/16X14X50#HS | 662303016135 |
| 255013310 | AA 7018 3/32X14X50#HS | 662303016180 |
| 255013369 | AA 7018 3/32X14X50#CT | 662303016227 |
| 255014169 | AA 7018 1/8X14X500#BK | 662303028923 |
| 255014185 | AA 7018 3/32X14X500#BK | 662303028947 |
| 255015315 | AA 7018 5/32X14X50#HS | 662303016371 |
| 255015364 | AA 7018 5/32X14X50#CT | 662303016418 |
| 255017311 | AA 7018 7/32X18X50#HS | 662303016548 |
| 255011421 | AA 7018 1/4X18X10#HS | 662303016050 |
| 255011827 | AA 7018 1/8X14X10#HS | 662303016098 |
| 255013120 | AA 7018 3/16X14X10#HS | 662303016142 |
| 255013161 | AA 7018 3/16X14X50#CT | 662303016173 |
| 255013328 | AA 7018 3/32X14X10#HS | 662303016197 |
| 255014201 | AA 7018 3/32X14X11#QP | 662303028961 |
| 255014219 | AA 7018 1/8X14X11#QP | 662303028978 |
| 255014227 | AA 7018 5/32X14X11#QP | 662303028985 |
| 255014235 | AA 7018 3/16X14X11#QP | 662303028992 |
| 255014425 | AA 7018 1/8X14X5#CT | 662303054007 |
| 255014433 | AA 7018 5/32X14X5#CT | 662303054014 |
| 255014649 | AA 7018 3/32X12X8#QP | 662303041779 |
| 255014656 | AA 7018 3/16X18X11#QP | 662303041793 |
| 255015323 | AA 7018 5/32X14X10#HS | 662303016388 |
| 255015505 | AA 7018 1/8X14X5#VALP | 662303029036 |
| 255015513 | AA 7018 5/32X14X5#VALP | 662303029043 |
| 255015521 | AA 7018 3/32X14X5#VALP | 662303029050 |
| 255015539 | AA 7018 1/8X14X10#VALP | 662303029067 |
| 255015547 | AA 7018 5/32X14X10#VALP | 662303029074 |
| 255015554 | AA 7018 3/32X14X10#VALP | 662303029081 |
| 255015562 | AA 7018 3/16X14X10#VALP | 662303063658 |
| 255017329 | AA 7018 7/32X18X10#HS | 662303016555 |
| 255011835 | AA 7018 1/8X14X50#HS | 662303080891 |
SAW
Accessories
Depositions/Paramaters
| Diameter | Optimal Amperage | Range Amperage | Deposition Rate | Efficiency |
|---|---|---|---|---|
| 3/32 in, 2.4 mm | 90 A | 70 - 100 | 1.7 lbs./hr., 0.8 kg./hr. | 66.3 % |
| 1/8 in, 3.2 mm | 120 A | 90 - 160 | 2.6 lbs./hr., 1.2 kg./hr. | 71.6 % |
| 140 A | 90 - 160 | 2.7 lbs./hr., 1.2 kg./hr. | 70.9 % | |
| 5/32 in, 4.0 mm | 140 A | 130 - 220 | 3.1 lbs./hr., 1.4 kg./hr. | 75 % |
| 170 A | 130 - 220 | 3.8 lbs./hr., 1.7 kg./hr. | 73.5 % | |
| 3/16 in, 4.8 mm | 200 A | 200 - 300 | 4.9 lbs./hr., 2.2 kg./hr. | 76.4 % |
| 250 A | 200 - 300 | 5.4 lbs./hr., 2.4 kg./hr. | 74.6 % | |
| 7/32 in, 5.6 mm | 250 A | 250 - 350 | 6.5 lbs./hr., 2.9 kg./hr. | 75 % |
| 300 A | 250 - 350 | 7.2 lbs./hr., 3.3 kg./hr. | 74 % | |
| 1/4 in, 6.4 mm | 300 A | 300 - 400 | 7.7 lbs./hr., 3.5 kg./hr. | 78 % |
| 350 A | 300 - 400 | 8.7 lbs./hr., 3.9 kg./hr. | 77 % |
Extra Info
El Atom Arc 7018 generalmente no requiere precalentamiento para prevenir qebraduras bajo los cordones de soldadura. Los aceros endurecibles deben de precalentarse para prevenir la formaciòn de zonas afectadas por el calor, y elimina las tendencias a grietas y cuarteaduras por enfriamiento. El precalentamiento tambien puede ser requerido en soldaduras de secciones pesadas.
Complementary Products
Seismic Data
All listed prices are in U.S. dollars and represent the Manufacturer's Suggested Retail Price (MSRP) for sale in the United States. Actual selling price will be determined by the Distributor. Prices are subject to change without notice.