DUAL SHIELD T-5
Dual Shield T-5 es un alambre básico que resiste carga pesada sin quebrarse y es ductil en depósitos.
características
Dual Shield T-5 es un alambre básico que resiste carga pesada sin quebrarse y es ductil en depósitos. Los diametros pequeños como .045 & 1/16" pueden ser usados en cualquier posición. Las características del arco son globulares pero pueden ser mejoradas son el uso de mezclas de Argón. Dual Shield T-5 es recomendado para fabricación media y pesada de muchos aceros al carbono donde la resistencia y la firmeza son requeridos.Es una buena opción para los aceros al carbono cuando se requiere mayor resistencia a la tenasidad y agrietamientos. También es una buena opción para aceros al carbono cuando han sido unidos, templados aceros de alta resistencia y baja aleación. El análisis del metal fundido es similar al del E7018.1 con electrodos bajos en hidrógeno.
View large imageclasificaciones
Classifications/Approvals
- L.R.- 3S,3YS(H10)
- CONTROLAS
- TUV
- A.B.S.- 3SA,3YSA(H10)
- ASME SFA 5.20
- B.V.- SA3YM(HH)
- AWS A5.20; E71T-5CJH4/T-5MJH4
- G.L.- 5YH10S
- D.N.V.- III YMS(H10)
propiedades
| As Welded 75% Ar / 25% CO<sub>2</sub> | |
|---|---|
| Yield Strength | 68 ksi, 460 MPa |
| Tensile Strength | 81 ksi, 560 MPa |
| Reduction in Area | 71 % |
| Elongation in 2" | 31 % |
| Stress Relieved 2 hrs. @ 1150ºF (621ºC) 75% Ar / 25% CO2 | |
| Yield Strength | 52 ksi, 355 MPa |
| Tensile Strength | 74 ksi, 500 MPa |
| Reduction in Area | 76 % |
| Elongation in 2" | 34 % |
| Typical Charpy V-Notch Impact Properties | |
| Testing Temperature 0ºF (-18ºC) | |
| As Welded 75% Ar / 25% CO2 | 96 ft.-lbs., 130 J |
| Stress Relieved 2 hrs. @ 1150 F (621 C) 75% Ar / 25% CO2 | 174 ft.-lbs., 236 J |
| Testing Temperature -20ºF (-29ºC) | |
| As Welded 75% Ar / 25% CO2 | 81 ft.-lbs., 110 J |
| Stress Relieved 2 hrs. @ 1150ºF (621ºC) 75% Ar / 25% CO2 | 131 ft.-lbs., 178 J |
| Testing Temperature -40ºF (-40ºC) | |
| As Welded 75% Ar / 25% CO2 | 71 ft.-lbs., 96 J |
| Stress Relieved 2 hrs. @ 1150ºF (621ºC) 75% Ar / 25% CO2 | 103 ft.-lbs., 140 J |
| Testing Temperature -60ºF (-51ºC) | |
| As Welded 75% Ar / 25% CO2 | 59 ft.-lbs., 80 J |
| Stress Relieved 2 hrs. @ 1150ºF (621ºC) 75% Ar / 25% CO2 | 93 ft.-lbs., 126 J |
| Typical Undiluted Weld Metal Analysis | |
| 75% Ar / 25% CO2 | |
| C | 0.066 % |
| Mn | 1.45 % |
| Si | 0.52 % |
| P | 0.007 % |
| S | 0.013 % |
Part No.
SAW
Accessories
Depositions/Paramaters
| Diameter | Amps | Volts | Wire Feed Speed | Deposition Rate | Efficiency | Electrical Stickout |
|---|---|---|---|---|---|---|
| .045 in, 1.2 mm | 170 A A | 19 | 285 ipm, 724 cm/min | 7 lbs./hr., 3.2 kg./hr. | 96 % | 3/4 inches, 19.1 mm |
| 250 A A | 30 | 469 ipm, 1191 cm/min | 10.8 lbs./hr., 4.9 kg./hr. | 91 % | 1 inches, 25.4 mm | |
| 300 A A | 32 | 606 ipm, 1539 cm/min | 14.2 lbs./hr., 6.44 kg./hr. | 92 % | 1 inches, 25.4 mm | |
| 350 A A | 32 | 740 ipm, 1880 cm/min | 17.5 lbs./hr., 7.94 kg./hr. | 93 % | 1 inches, 25.4 mm | |
| 1/16 in, 1.6 mm | 300 A A | 30 | 226 ipm, 574 cm/min | 9.8 lbs./hr., 4.45 kg./hr. | 92 % | 1 inches, 25.4 mm |
| 400 A A | 32 | 369 ipm, 937 cm/min | 16.1 lbs./hr., 7.3 kg./hr. | 92 % | 1 inches, 25.4 mm | |
| 450 A A | 32 | 422 ipm, 1072 cm/min | 18.5 lbs./hr., 8.4 kg./hr. | 93 % | 1 inches, 25.4 mm | |
| 3/32 in, 2.4 mm | 450 A A | 32 | 217 ipm, 551 cm/min | 17.6 lbs./hr., 8 kg./hr. | 85 % | 1 inches, 25.4 mm |
| 475 A A | 32 | 245 ipm, 622 cm/min | 20 lbs./hr., 9.1 kg./hr. | 87 % | 1 inches, 25.4 mm | |
| 500 A A | 32 | 270 ipm, 686 cm/min | 22.8 lbs./hr., 10.3 kg./hr. | 89 % | 1 inches, 25.4 mm | |
| 550 A A | 33 | 346 ipm, 879 cm/min | 29.6 lbs./hr., 13.4 kg./hr. | 91 % | 1 inches, 25.4 mm |
Extra Info
Shielding Gas
75% Argón/25% CO2, or 90% Argón/8% CO2/2% O2, or 100% CO2
Complementary Products
Seismic Data
All listed prices are in U.S. dollars and represent the Manufacturer's Suggested Retail Price (MSRP) for sale in the United States. Actual selling price will be determined by the Distributor. Prices are subject to change without notice.