DUAL SHIELD T-75
Dual Shield T-75 es es un alambre con un sistema básico diseñado para fundiciones múltiples el cual produce excelentes propiedades en ambos casos, en fundición y en condiciones de relevación deesfuerzo.
características
Dual Shield T-75 es es un alambre con un sistema básico diseñado para fundiciones múltiples el cuál produce excelentes propiedades en ambos casos, en fundición y en condiciones de relevación de esfuerzos. El excepcional impacto endurecedor y de baja sensibilidad a las quebraduras lo hacen que sea una decisión ideal para los aceros al bajo y medio carbono. Las características del arco son globulares, pero pueden ser mejoradas con mezclas de gases de Argón. Los análisis del metal fundido son similares al E7018 de electrodos bajos en hidrógeno.
View large imageclasificaciones
Classifications/Approvals
- QPL-24403/1; MIL-70T-5M (.045", 1/16", 5/64", 7/64")
- AWS A5.20; E71T-5CJH4/T-5MJH4 (.045", 1/16")
- AWS A5.20; E70T-5CJH4 (3/32", 5/64", 7/64")
- AWS A5.20: E70T-5CJ (7/64")
- A.B.S.-3YSA (3/32", 7/64")
- L.R.-3S,3YS(H15) (3/32", 7/64")
- D.N.V.-III YMS (3/32", 7/64")
- QPL-24403/1; MIL-70T-5C (3/32")
- ASME SFA 5.20
propiedades
| As Welded 75% Ar / 25% CO<sub>2</sub> | |
|---|---|
| Yield Strength | 73 ksi, 505 MPa |
| Tensile Strength | 86 ksi, 595 MPa |
| Reduction in Area | 66 % |
| Elongation in 2" | 29 % |
| As Welded CO2 | |
| Yield Strength | 72 ksi, 495 MPa |
| Tensile Strength | 82 ksi, 565 MPa |
| Reduction in Area | 65 % |
| Elongation in 2" | 28 % |
| Typical Charpy V-Notch Impact Properties | |
| Testing Temperature -40ºF (-40ºC) | |
| As Welded 75% Ar / 25% CO2 | 55 ft.-lbs., 75 J |
| As Welded CO2 | 70 ft.-lbs., 95 J |
| Typical Undiluted Weld Metal Analysis | |
| CO2 | |
| C | 0.04 % |
| Mn | 1.5 % |
| Si | 0.6 % |
| P | 0.006 % |
| S | 0.010 % |
| 75% Ar / 25% CO2 | |
| C | 0.04 % |
| Mn | 1.7 % |
| Si | 0.7 % |
| P | 0.004 % |
| S | 0.011 % |
Part No.
| Part No. | Model / Product Description | UPC |
|---|---|---|
| 243003878 | DS T-75 3/32X500#POP | 662303077785 |
| 243006004 | DS T-75 3/32X60#CL | 662303002152 |
| 245020128 | DS T-75 045X33#AWS | 662303005924 |
| 245020417 | DS T-75 1/16X60#CL | 662303006068 |
| 245020425 | DS T-75 5/64X60#CL | 662303059958 |
| 245020433 | DS T-75 5/64X500#POP | 662303078461 |
| 245020441 | DS T-75 1/16X600#OMP | 662303080228 |
SAW
Accessories
Depositions/Paramaters
| Diameter | Amps | Volts | Wire Feed Speed | Deposition Rate | Efficiency | Electrical Stickout |
|---|---|---|---|---|---|---|
| .045 in, 1.2 mm | 170 A | 19 | 285 ipm, 724 cm/min | 7 lbs./hr., 3.2 kg./hr. | 96 % | 3/4 inches, 19.1 mm |
| 250 A | 30 | 469 ipm, 1191 cm/min | 10.8 lbs./hr., 4.9 kg./hr. | 91 % | 1 inches, 25.4 mm | |
| 300 A | 32 | 606 ipm, 1539 cm/min | 14.2 lbs./hr., 6.44 kg./hr. | 92 % | 1 inches, 25.4 mm | |
| 350 A | 32 | 740 ipm, 1880 cm/min | 17.5 lbs./hr., 7.94 kg./hr. | 93 % | 1 inches, 25.4 mm | |
| 1/16 in, 1.6 mm | 300 A | 30 | 226 ipm, 574 cm/min | 9.8 lbs./hr., 4.45 kg./hr. | 92 % | 1 inches, 25.4 mm |
| 400 A | 32 | 369 ipm, 937 cm/min | 16.1 lbs./hr., 7.3 kg./hr. | 92 % | 1 inches, 25.4 mm | |
| 450 A | 32 | 422 ipm, 1072 cm/min | 18.5 lbs./hr., 8.4 kg./hr. | 93 % | 1 inches, 25.4 mm | |
| 3/32 in, 2.4 mm | 450 A | 32 | 217 ipm, 551 cm/min | 17.6 lbs./hr., 8 kg./hr. | 85 % | 1 inches, 25.4 mm |
| 475 A | 32 | 245 ipm, 622 cm/min | 20 lbs./hr., 9.1 kg./hr. | 87 % | 1 inches, 25.4 mm | |
| 500 A | 32 | 270 ipm, 686 cm/min | 22.8 lbs./hr., 10.3 kg./hr. | 89 % | 1 inches, 25.4 mm | |
| 550 A | 33 | 346 ipm, 879 cm/min | 29.6 lbs./hr., 13.4 kg./hr. | 91 % | 1 inches, 25.4 mm |
Extra Info
Shielding Gas
CO2 para 3/32" y 7/64 (2.4 y 2.8 mm); 75% Argón/ 25% CO2 para .045 y 1/1 (1.2 y 1.6 mm)"
Complementary Products
Seismic Data
All listed prices are in U.S. dollars and represent the Manufacturer's Suggested Retail Price (MSRP) for sale in the United States. Actual selling price will be determined by the Distributor. Prices are subject to change without notice.