DUAL SHIELD II 110
El Dual Shield II 110 es un alambre para soldadura fuera de posición el cuál produce una lisa transferencia de spray, bajo en salpicaduras, y fácil de remover, y buena dirección del arc.
características
El Dual Shield II 110 es un alambre para soldadura fuera de posición el cuál produce una lisa transferencia de spray, bajo en salpicaduras, y fácil de remover, y buena dirección del arc. El Dual Shield II 110 fue diseñado para unir aceros fuertes tales como HY-100 y el T-i según la condición de sueldado con autógena o la relevación de esfuerzo. Gas protector 75% Ar/el 25% CO2. Es el adecuado para la unión de aceros de alta tensión que serán usados en temperaturas bajas. El análisis del metal es similar al electrodo E11018-M bajo en Hidrógeno.
View large imageclasificaciones
Classifications/Approvals
- A.B.S.- AWS A5.29; E111T1-K3M
- AWS A5.29; E111T1-K3CH4/K3MH4
- ASME SFA 5.29
propiedades
| As Welded 75% Ar / 25% CO2 | |
|---|---|
| Yield Strength | 110 ksi, 760 MPa |
| Tensile Strength | 120 ksi, 830 MPa |
| Reduction in Area | 54 % |
| Elongation in 2" | 19 % |
| Stress Relieved 8 hrs. @ 1150ºF (621ºC) 75% Ar / 25% CO2 | |
| Yield Strength | 108 ksi, 745 MPa |
| Tensile Strength | 116 ksi, 800 MPa |
| Reduction in Area | 56 % |
| Elongation in 2" | 19 % |
| Typical Charpy V-Notch Impact Properties | |
| Testing Temperature 0ºF (-18ºC) | |
| As Welded 75% Ar / 25% CO2 | 40 ft.-lbs., 54 J |
| Stress Relieved 8 hrs. @ 1150ºF (621ºC) 75% Ar / 25% CO2 | 29 ft.-lbs., 39 J |
| Testing Temperature -20ºF (-29ºC) | |
| As Welded 75% Ar / 25% CO2 | 36 ft.-lbs., 49 J |
| Stress Relieved 8 hrs. @ 1150ºF (621ºC) 75% Ar / 25% CO2 | 27 ft.-lbs., 37 J |
| Testing Temperature -60ºF (-51ºC) | |
| As Welded 75% Ar / 25% CO2 | 26 ft.-lbs., 35 J |
| Stress Relieved 8 hrs. @ 1150ºF (621ºC) 75% Ar / 25% CO2 | 21 ft.-lbs., 28 J |
| Typical Undiluted Weld Metal Analysis | |
| 75% Ar / 25% CO2 | |
| C | .05 % |
| Mn | 1.91 % |
| Si | .43 % |
| P | .013 % |
| S | .010 % |
| Ni | 1.74 % |
| Mo | 0.39 % |
Part No.
SAW
Accessories
Depositions/Paramaters
| Diameter | Amps | Volts | Wire Feed Speed | Deposition Rate | Efficiency |
|---|---|---|---|---|---|
| .045 in, 1.2 mm | 150 A A | 28 | 200 ipm, 508 cm/min | 4.2 lbs./hr., 1.91 kg./hr. | 86 % |
| 210 A A | 29 | 300 ipm, 762 cm/min | 6.3 lbs./hr., 2.86 kg./hr. | 86 % | |
| 250 A A | 30 | 400 ipm, 1016 cm/min | 8.5 lbs./hr., 3.86 kg./hr. | 87 % | |
| 290 A A | 33 | 500 ipm, 1270 cm/min | 10.7 lbs./hr., 4.85 kg./hr. | 87 % | |
| 330 A A | 34 | 600 ipm, 1524 cm/min | 12.7 lbs./hr., 5.76 kg./hr. | 87 % | |
| .052 in, 1.4 mm | 155 A A | 25 | 150 ipm, 381 cm/min | 4.4 lbs./hr., 2 kg./hr. | 87 % |
| 245 A A | 28 | 250 ipm, 635 cm/min | 7.3 lbs./hr., 3.31 kg./hr. | 86 % | |
| 310 A A | 33 | 350 ipm, 889 cm/min | 10.2 lbs./hr., 4.63 kg./hr. | 85 % | |
| 360 A A | 36 | 450 ipm, 1143 cm/min | 13.3 lbs./hr., 6.03 kg./hr. | 85 % | |
| 430 A A | 37 | 600 ipm, 1524 cm/min | 17.6 lbs./hr., 7.98 kg./hr. | 87 % | |
| 1/16 in, 1.6 mm | 190 A A | 27 | 150 ipm, 38 cm/min | 6.1 lbs./hr., 2.77 kg./hr. | 87 % |
| 300 A A | 30 | 250 ipm, 635 cm/min | 10.2 lbs./hr., 4.63 kg./hr. | 87 % | |
| 365 A A | 33 | 300 ipm, 762 cm/min | 12.3 lbs./hr., 5.58 kg./hr. | 86 % | |
| 410 A A | 33 | 350 ipm, 889 cm/min | 14 lbs./hr., 6.35 kg./hr. | 88 % | |
| 450 A A | 33 | 400 ipm, 1016 cm/min | 16.1 lbs./hr., 7.3 kg./hr. | 87 % | |
| 500 A A | 39 | 500 ipm, 1270 cm/min | 20.1 lbs./hr., 9.11 kg./hr. | 87 % |
Extra Info
Shielding Gas
75% Argon/25% CO2
100% CO2
Complementary Products
Seismic Data
All listed prices are in U.S. dollars and represent the Manufacturer's Suggested Retail Price (MSRP) for sale in the United States. Actual selling price will be determined by the Distributor. Prices are subject to change without notice.