DUAL SHIELD II 101-TM
El Dual Shield II 101-TC es un alambre para soldadura fuera de posicion desarrollado para cumplir los requerimientos más estrictos de las especificaciones militares..
características
El Dual Shield II 101-TM es un alambre tubular desarrolado para cumplir con los requerimientos más estrictos de las especificaciones militares. Las excelentes propiedades mecánicas y la rudeza al imacto en bajas temeraturas lo convierten en la opcion ideal para aceros HY80 y HSLA80. Las características lisas del arc, bajos niveles de salpicadura, y la facilidad de limpieza post soldadura parecido a otros productos Dual Shield II. El Dual Shield II 101.TM fué diseñado específicamente para soldar aceros HY-80 y A710, tipicamente usados en la construcción de barcos con gas protector 75% Ar/ 25% CO2.
View large imageclasificaciones
Classifications/Approvals
- ASME SFA 5.29
- QPL-24403/2; MIL-101TM
- AWS A5.29; E81T1-K2M
propiedades
| As Welded MIL-E-24403/2 Vertical-Up HY-80 Base Plate 75% Ar / 25% CO2 | |
|---|---|
| Yield Strength | 87 ksi, 605 MPa |
| Tensile Strength | 97 ksi, 670 MPa |
| Reduction of Area | 64 % |
| Elongation in 2" | 24 % |
| As Welded MIL-E-24403/2 Vertical-Up A-710 Base Plate 75% Ar / 25% CO2 | |
| Yield Strength | 86 ksi, 595 MPa |
| Tensile Strength | 95 ksi, 655 MPa |
| Reduction of Area | 61 % |
| Elongation in 2" | 23 % |
| AWS A5.29 Requirement 75% Ar / 25% CO2 | |
| Yield Strength | 86 ksi, 595 MPa |
| Tensile Strength | 94 ksi, 655 MPa |
| Reduction of Area | 64 % |
| Elongation in 2" | 24 % |
| Typical Charpy V-Notch Impact Properties | |
| Testing Temperature 0ºF (-18ºC) | |
| As Welded MIL-E-24403/2 Vertical-Up HY-80 Base Plate 75% Ar / 25% CO2 | 68 ft.-lbs., 92 J |
| As Welded MIL-E-24403/2 Vertical-Up A-710 Base Plate 75% Ar / 25% CO2 | 70 ft.-lbs., 95 J |
| AWS A5.29 Requirement 75% Ar / 25% CO2 | 79 ft.-lbs., 107 J |
| Testing Temperature -60ºF (-51ºC) | |
| As Welded MIL-E-24403/2 Vertical-Up HY-80 Base Plate 75% Ar / 25% CO2 | 42 ft.-lbs., 57 J |
| As Welded MIL-E-24403/2 Vertical-Up A-710 Base Plate 75% Ar / 25% CO2 | 42 ft.-lbs., 57 J |
| AWS A5.29 Requirement 75% Ar / 25% CO2 | 49 ft.-lbs., 66 J |
| Typical Dynamic Tear Properties | |
| Testing Temperature 30ºF (-1ºC) | |
| As Welded | 585 ft.-lbs., 793 J |
| Testing Temperature -20ºF (-29ºC) | |
| As Welded | 385 ft.-lbs., 522 J |
| Typical Undiluted Weld Metal Analysis | |
| 75% Ar / 25% CO2 | |
| C | .05 % |
| Mn | 1.13 % |
| Si | .30 % |
| P | .013 % |
| S | .010 % |
| Ni | 1.72 % |
Part No.
SAW
Accessories
Depositions/Paramaters
| Diameter | Amps | Volts | Wire Feed Speed | Deposition Rate | Efficiency |
|---|---|---|---|---|---|
| .035 in, 0.9 mm | 130 A A | 22 | 288 ipm, 732 cm/min | 3.2 lbs./hr., 1.45 kg./hr. | 85 % |
| 150 A A | 25 | 384 ipm, 975 cm/min | 4.3 lbs./hr., 1.95 kg./hr. | 85 % | |
| 200 A A | 27 | 576 ipm, 1463 cm/min | 6.5 lbs./hr., 2.95 kg./hr. | 85 % | |
| 250 A A | 30 | 784 ipm, 1991 cm/min | 8.9 lbs./hr., 4.04 kg./hr. | 86 % | |
| .045 in, 1.2 mm | 150 A A | 28 | 200 ipm, 508 cm/min | 4.2 lbs./hr., 1.91 kg./hr. | 86 % |
| 210 A A | 29 | 300 ipm, 762 cm/min | 6.3 lbs./hr., 2.86 kg./hr. | 86 % | |
| 250 A A | 30 | 400 ipm, 1016 cm/min | 8.5 lbs./hr., 3.86 kg./hr. | 87 % | |
| 290 A A | 33 | 500 ipm, 1270 cm/min | 10.7 lbs./hr., 4.85 kg./hr. | 87 % | |
| 330 A A | 34 | 600 ipm, 1524 cm/min | 12.7 lbs./hr., 5.76 kg./hr. | 87 % | |
| .052 in, 1.4 mm | 155 A A | 25 | 150 ipm, 381 cm/min | 4.4 lbs./hr., 2 kg./hr. | 87 % |
| 245 A A | 28 | 250 ipm, 635 cm/min | 7.3 lbs./hr., 3.31 kg./hr. | 86 % | |
| 310 A A | 33 | 350 ipm, 889 cm/min | 10.2 lbs./hr., 4.63 kg./hr. | 85 % | |
| 360 A A | 36 | 450 ipm, 1143 cm/min | 13.3 lbs./hr., 6.03 kg./hr. | 85 % | |
| 430 A A | 37 | 600 ipm, 1524 cm/min | 17.6 lbs./hr., 7.98 kg./hr. | 87 % | |
| 1/16 in, 1.6 mm | 190 A A | 27 | 150 ipm, 38 cm/min | 6.1 lbs./hr., 2.77 kg./hr. | 87 % |
| 300 A A | 30 | 250 ipm, 635 cm/min | 10.2 lbs./hr., 4.63 kg./hr. | 87 % | |
| 365 A A | 33 | 300 ipm, 762 cm/min | 12.3 lbs./hr., 5.58 kg./hr. | 86 % | |
| 410 A A | 33 | 350 ipm, 889 cm/min | 14 lbs./hr., 6.35 kg./hr. | 88 % | |
| 450 A A | 33 | 400 ipm, 1016 cm/min | 16.1 lbs./hr., 7.3 kg./hr. | 87 % | |
| 500 A A | 39 | 500 ipm, 1270 cm/min | 20.1 lbs./hr., 9.11 kg./hr. | 87 % | |
| 5/64 in, 2.0 mm | 250 A A | 26 | 112 ipm, 284 cm/min | 6.4 lbs./hr., 2.9 kg./hr. | 85 % |
| 350 A A | 28 | 176 ipm, 447 cm/min | 10.5 lbs./hr., 4.76 kg./hr. | 85 % | |
| 450 A A | 31 | 258 ipm, 655 cm/min | 14.8 lbs./hr., 6.71 kg./hr. | 85 % | |
| 3/32 in, 2.4 mm | 350 A A | 30 | 124 ipm, 315 cm/min | 9.6 lbs./hr., 4.35 kg./hr. | 84 % |
| 400 A A | 30 | 166 ipm, 422 cm/min | 12.7 lbs./hr., 5.76 kg./hr. | 85 % | |
| 450 A A | 31 | 197 ipm, 500 cm/min | 15 lbs./hr., 6.8 kg./hr. | 86 % | |
| 500 A A | 32 | 237 ipm, 602 cm/min | 18.5 lbs./hr., 8.39 kg./hr. | 86 % | |
| 550 A A | 34 | 278 ipm, 706 cm/min | 21.3 lbs./hr., 9.66 kg./hr. | 88 % | |
| 7/64 in, 2.8 mm | 550 A A | 30 | 140 ipm, 356 cm/min | 17.1 lbs./hr., 7.76 kg./hr. | 85 % |
| 625 A A | 34 | 161 ipm, 409 cm/min | 19.6 lbs./hr., 8.89 kg./hr. | 86 % | |
| 700 A A | 36 | 190 ipm, 483 cm/min | 23 lbs./hr., 10.43 kg./hr. | 86 % | |
| 1/8 in, 3.2 mm | 600 A A | 32 | 111 ipm, 282 cm/min | 16.2 lbs./hr., 7.35 kg./hr. | 86 % |
| 725 A A | 34 | 153 ipm, 389 cm/min | 22.5 lbs./hr., 10.21 kg./hr. | 86 % | |
| 850 A A | 38 | 194 ipm, 93 cm/min | 29.2 lbs./hr., 13.25 kg./hr. | 85 % |
Extra Info
Shielding Gas
75% Argon/25% CO2
Complementary Products
Seismic Data
All listed prices are in U.S. dollars and represent the Manufacturer's Suggested Retail Price (MSRP) for sale in the United States. Actual selling price will be determined by the Distributor. Prices are subject to change without notice.