SHIELD-BRIGHT 2209
Shield-Bright 2209 es un electrodo tubular para soldadura fuera de posición doble.
características
Shield-Bright 2209 fue desarollado para la soldadura de aceros inoxidables tipo '2205' e.g. UNS S31803, S32205, y J92205. También puede ser usado para la soldadura en ángulos más incilnados de aceros inoxidables dobles. Se ha provado con temperaturas críticas de resistencia al impacto o perforación. Shield-Bright 2209 fue desarrollado para soldar en cualquier posición y el cual se desempeña particularmente bien en una posición vertical con remoción de escoria. Se recomienda usarse con los gases 75% Ar / 25% CO2.
View large imageclasificaciones
Classifications/Approvals
- AWS A5.22; E2209T1-4
- ASME II SFA 5.22 E2209T1-4
- ABS
- ASME IX F No. 6
- D.N.V.- For Duplex S/S
- L.R.- S 31803 S
- A.B.S.- AWS A5.22; E2209T1-4
- TUV
propiedades
| As Welded 75% Ar / 25% CO2 | |
|---|---|
| Yield Stress | 95 ksi, 650 MPa |
| Tensile Strength | 120 ksi, 820 MPa |
| Elongation in 2" | 25 % |
| V-Notch Impact Toughness | |
| Absorbed Energy @ -4ºF (-20ºC) | 45 ft.-lbs., 61 J |
| Absorbed Energy @ -40ºF (-40ºC) | 40 ft.-lbs., 54 J |
| Absorbed Energy @ -60ºF (-51ºC) | 35 ft.-lbs., 47 J |
| Typical Undiluted Weld Metal Analysis | |
| 75% Ar / 25% CO2 | |
| C | 0.03 % |
| Mn | 0.9 % |
| Si | 0.35 % |
| Cr | 22.5 % |
| Ni | 9.2 % |
| Mo | 3 % |
| Cu | 0.1 % |
| N | 0.16 % |
| Ferrite | 35 FN |
Part No.
SAW
Accessories
Depositions/Paramaters
| Diameter | Amps | Volts | Wire Feed Speed | Deposition Rate | Efficiency | Electrical Stickout |
|---|---|---|---|---|---|---|
| .035 in, 0.9 mm | 100A A | 23 | 265 ipm, 6.7 cm/min | 2.9 lbs./hr., 1.3 kg./hr. | 83.9 % | 1/2 - 1 inches, 12.5 - 25 mm |
| 120 A A | 23 | 315 ipm, 8 cm/min | 3.4 lbs./hr., 1.5 kg./hr. | 81.4 % | 1/2 - 1 inches, 12.5 - 25 mm | |
| 140 A A | 25 | 405 ipm, 10.3 cm/min | 4.6 lbs./hr., 2.1 kg./hr. | 82.6 % | 1/2 - 1 inches, 12.5 - 25 mm | |
| 170 A A | 26 | 530 ipm, 13.5 cm/min | 5.7 lbs./hr., 2.6 kg./hr. | 81.8 % | 1/2 - 1 inches, 12.5 - 25 mm | |
| .045 in, 1.2 mm | 130 A A | 25 | 227 ipm, 5.8 cm/min | 4.25 lbs./hr., 1.9 kg./hr. | 84 % | 1/2 - 1 inches, 12.5 - 25 mm |
| 165 A A | 26 | 341 ipm, 8.7 cm/min | 6.14 lbs./hr., 2.8 kg./hr. | 83 % | 1/2 - 1 inches, 12.5 - 25 mm | |
| 190 A A | 28 | 445 ipm, 11.3 cm/min | 8.08 lbs./hr., 3.7 kg./hr. | 84 % | 1/2 - 1 inches, 12.5 - 25 mm | |
| 220 A A | 30 | 567 ipm, 14.4 cm/min | 10.24 lbs./hr., 4.6 kg./hr. | 84 % | 1/2 - 1 inches, 12.5 - 25 mm | |
| 1/16 in, 1.6 mm | 170 A A | 25 | 154 ipm, 3.9 cm/min | 5.34 lbs./hr., 2.4 kg./hr. | 83 % | 1/2 - 1 inches, 12.5 - 25 mm |
| 210 A A | 27 | 193 ipm, 4.9 cm/min | 6.89 lbs./hr., 3.1 kg./hr. | 82.5 % | 1/2 - 1 inches, 12.5 - 25 mm | |
| 250 A A | 28 | 243 ipm, 6.2 cm/min | 8.57 lbs./hr., 3.9 kg./hr. | 83 % | 1/2 - 1 inches, 12.5 - 25 mm | |
| 300 A A | 29 | 321 ipm, 8.2 cm/min | 11.43 lbs./hr., 5.2 kg./hr. | 83 % | 1/2 - 1 inches, 12.5 - 25 mm |
Extra Info
Shielding Gas
75%Ar / 25%CO2
Complementary Products
Seismic Data
All listed prices are in U.S. dollars and represent the Manufacturer's Suggested Retail Price (MSRP) for sale in the United States. Actual selling price will be determined by the Distributor. Prices are subject to change without notice.