A2 PEI Welding Controller
Control system for A2 tractors and A2 welding
heads
- Analog type that can control most brands of power supplies
- Suitable for MIG or SAW process
- Preset travel speed, voltage, and wire speed by simply turning the three knobs – actual data shown on digital displays during welding
- Change direction of welding using switch on front panel
- Choice of scratch start or direct start methods
- Adjustable burn-back time
A2 PEI Welding Controller
| Supply voltage from the power source |
42 V AC, 50/60 Hz |
| Power consumption |
Max 700 VA |
| Motor connection adjusted for ESAB's A2 motors |
42 V DC, 3.5 A |
| Speed control |
Internal EMF-adjustment |
| Welding speed |
0.1-2 m/min, 4-79 ipm |
| Max travel speed |
2 m/min, 79 ipm |
| Wire feed speed, consumable wire |
0.3-18 m/min, 12-709 ipm |
| Burn-back time |
0-2.0 S |
| Pre gas flow time |
0.5 S |
| Post gas flow time |
1.0 S |
| Connection to power source |
Burndy contact, 23-poles |
| Control cable max |
100 m, 328 ft |
| Welding voltage control |
0-10 V DC |
| Gas Valve/Auxiliary |
1 A, 42 V AC |
| Flow guard |
No Contact/PNP OC |
| Limit switches |
No Contact/PNP OC |
| External current shunt |
1000A/60 mV, 1500A/60 mV, 600A/100 mV, 750A/100 mV |
| Operating temperature |
-10-40 °C, 14-104 °F |
| Weight |
6.2 kg, 14 lb |
| Dimensions |
197x227x220 mm, 7.8x9.0x8.7 in |
| Enclosure class |
IP 23 |
A2 PEI Welding Controller
| 449330880 |
A2 PEI Welding Controller |
|
| There are no accessories. |
|---|
View large image