Arcaloy 308/308H-15 is for welding types 304H and 347H stainless when high temperature service is required.
Arcaloy 308/308H-16 was developed for welding types 304H and 347H stainless when high temperature service is required.
Arcaloy 308L-15 was developed for welding 304L stainless.
Arcaloy 308L-16 was developed for welding 304L stainless.
Arcaloy 308L Plus electrode utilize a heavy coating to maximize performance in the flat and horizontal position.
Arcaloy 309Nb-15 was developed to inhibit carbide precipitation in this type of alloy. Best used out-of-position on DC current.
Arcaloy 309Nb-16 was developed to control carbide precipitation in this type of alloy. Usable on AC or DC current.
Arcaloy 309/309H-15 is used for welding type 309 when high temperature service is required. Best used out-of-position on DC current.
Arcaloy 309/309H-16 is used for welding type 309 base metal when high temperature service is required. Usable on AC or DC current.
Arcaloy 309L-15 is used primarily in the overlay of steel or to join stainless steel to carbon or low alloy steels. Best used out-of-position on DC current only.
Arcaloy 309L-16 is used primarily in the overlay of steel or to join stainless steel to carbon or low alloy steels. Usable on AC or DC current.
Arcaloy 309L-17 Plus electrodes utilize a heavy coating to maximize performance in the flat and horizontal position. Usable on AC or DC current.
Arcaloy 309MoL-15 is designed for applications requiring molybdenum with a standard 309L analysis. Ideal for cladding prior to joining stainless steel to low alloy steels. Best used out-of-position on DC current.
Arcaloy 309MoL-16 is designed for applications requiring molybdenum with a standard 309L analysis. Ideal for cladding prior to joining stainless steel to low alloy steels. Usable on AC or DC current.
Arcaloy 310-15 electrodes were developed for the welding of type 310 stainless steel. Best used out-of-position on DC current.
All-State 310-16 electrodes were developed for the welding of type 310 stainless steel. Usable on AC or DC current.
Arcaloy 312-15 electrodes were originally designed for welding of high tensile alloys to high temperature heat-resisting alloys. Best used out-of-position on AC or DC current.
All-State 312-16 electrodes were originally designed for welding of high tensile alloys to high temperature heat-resisting alloys. Usable on AC or DC current.
Arcaloy 316/316H-15 can be used in applications where 316 stainless needs improved due to higher service temperature. Best used out-of-position on DC current.
Arcaloy 316/316H-16 can be used in applications where 316 stainless needs improved due to higher service temperatures. Usable on AC or DC current.
Arcaloy 316LF5-15 is an electrode where the composition has been balanced to give a weld deposit with a minimum ferrite content of 5 FN. Designed to weld type 316, 316L steels. Best used out-of-position on DC current.
Arcaloy 316LF5-16 is an electrode where the composition has been balanced to give a weld deposit with a minimum ferrite content of 5 FN. Designed to weld type 316, 316L steels. Usable on AC or DC current.
Arcaloy 316L-Plus electrode utilizes a heavy coating to maximize performance in the flat and horizontal position. Usable on AC or DC current.
Arcaloy 317L-15 electrodes are recommended for welding type 317 and 317L. The addition of molybdenum improves the weld metal crack resistance. Best used out-of-position on DC current.
Arcaloy 317L-16 electrodes are recommended for welding type 317 and 317L. The addition of molybdenum improves the weld metal crack resistance. Usable on AC or DC current.
Arcaloy 317L-17 Plus electrodes utilize a heavy coating to maximize performance in the flat and horizontal positions. Usable on AC or DC current. The addition of molybdenum improves resistance to pitting corrosion.
Arcaloy 320-15 electrodes are designed for welding Carpenter Stainless No. 20 Cb-3. Best used out-of-position on DC current.
Arcaloy 320LR-16 is a covered electrode designed to resist hot cracking on Carpenter No.20 Cb-3 steel. Usable on AC or DC current.
Arcaloy 347-15 electrodes are especially designed for welding types 347 and 321 alloys. Best used out-of-position on DC current.
Arcaloy 347-16 electrodes are especially designed for welding types 347 and 321 alloys. Usable on AC or DC current.
Arcaloy 410-16 electrodes are recommended for welding type 410 straight chromium steel. Usable on AC or DC current.
Arcaloy 410 NiMo-16 is designed for the welding of CA-6NM castings. Usable on AC or DC current.
Arcaloy 112 is a NiCrMo-3 alloy designed for joining nickel alloys and stainless to themselves and dissimilar steels.
Arcaloy 276 is a NiCrMo-4 alloy designed for joining, cladding or surfacing nickel based alloys and stainless steel.
Arcaloy 9N10 is intended to weld Monel* 400 to low alloy and stainless steels.
Arcaloy 8N12 electrodes are intended for the welding of high nickel alloys to other nickel alloys, stainless and low alloy steels.
Arcaloy ER308/308H is a high carbon grade of 308 for higher temperature requirements.
Arcaloy ER308L is a low carbon grade of 308 designed for MIG or TIG of stainless steels such as AISI 301, 304, 304L steels.
Arcaloy ER308LSi is a silicon enhanced MIG wire which significantly increases wetting action, resulting in a smooth weld to improve weldability and performance on 304 steels.
Arcaloy ER309L is a low carbon grade of 309 for MIG or TIG welding.
Arcaloy ER309LSi is a silicon enhanced grade of 309 which improves the welding properties such as wetting. Arcaloy ER309LSi has good general corrosion resistance.
Arcaloy ER310 is used to weld stainless steel of similar composition.
Arcaloy ER312 is used for welding stainless steels to mild steels and for welding high strength steels difficult to weld with ferritic electrodes.
Arcaloy ER316L is a low carbon grade of 316 designed for MIG or SAW of stainless steels. Can be used in combination with OK Flux 10.93 or 10.94.
Arcaloy ER316LSi is a low carbon, high silicon grade of 316. The addition of silicon improves the weldability and performance.
Arcaloy 317L is a continuous, solid, corrosion-resistant, chromium-nickel-molybdenum wire for welding of austenitic stainless alloys of 19% Cr, 13% Ni, 3% Mo types. Arcaloy 317L can be used in combination with OK Flux 10.93 or 10.94.
Arcaloy ER320LR Tigrod is designed for welding Carpenter 20Cb-3® type stainless steels.
Arcaloy ER347 is a columbium stabilized stainless steel for welding types 347and 321 stainless, come in MIG, TIG, and SAW forms. Can be used in combination with OK Flux 10.93, 10.94, and/or 10.95.
Arcaloy ER410 is used to weld stainless steel of similar analysis.
Arcaloy ER409Cb is a ferritic stainless steel stabilized with Niobium for joining 409 stainless.
Arcaloy 430LNb is a stabilized ferritic grade of bare wire .
Arcaloy ER82 is used for TIG, MIG, and SAW welding of base materials such as ASTM B163, B166, B167, and B168 alloys which have UNS Number N0660.
Arcaloy ER276 is a Ni-Cr-Mo alloy designed for joining or cladding where resistance to stress corrosion cracking, pitting and crevice corrosion is essential.
Arcaloy ER625 is a Ni-Cr-Mo alloy designed for cladding iron and joining similar steels or dissimilar steels such as stainless and low alloy materials.
Nickel-Arc 99 is designed for welding gray, malleable and nodular cast iron.
Arcaloy MC308L was developed to maximize performance and reduce the cast to deposit. The alloying elements make it ideal for joining 304 or 304L stainless.
Arcaloy MC309L was developed to maximize welding performance and reduce the cast to deposit. The alloying elements make it ideal for joining stainless to mild or carbon steels.
Arcaloy MC309LMo was developed to maximize welding performance and reduce the cast to deposit. The alloying elements make it ideal for cladding or joining stainless to low alloy steels.
Arcaloy MC316L was developed to maximize welding productivity and reduce the cast to deposit. The alloying elements are designed to improve corrosion resistance on 316 and 316L steels.
Arcaloy 439Ti is a ferritic metal cored wire developed for welding similar ferritic steels requiring 16-17% Cr. The addition of Titanium (Ti) optimizes weld metal transfer.
Arcaloy 430LCb is a ferritic metal cored wire developed for welding similar ferritic steels requiring 16-17% Cr. The addition of Niobium (Nb) or Columbium (Cb) optimizes weld metal transfer.
Arcaloy 18CrCb is a ferritic metal cored wire developed for welding similar ferritic steels requiring 18-19% Cr. The addition of Niobium (Nb) or Columbium (Cb) helps optimize weld metal transfer.
Arcaloy 409Cb is a ferritic metal cored wire developed for welding similar ferritic steels requiring 11-12% Cr. The addition of Niobium (Nb) or Columbium (Cb) helps optimize weld metal transfer.
Arcaloy 409Ti is a ferritic metal cored wire developed for welding similar ferritic steels requiring 11-12% Cr. The addition of Titanium (Ti) helps to optimized arc stability and improve weld metal transfer.
Arcaloy MC410 is a Martensitic metal cored wire for welding similar martensitic steels. Developed to maximize welding performance and reduce the cast to deposit.
Arcaloy MC410NiMo is a martensitic metal cored wire for weld type CA-6NM castings to maximize welding performance and reduce the cast to deposit.
